CERAKOTE® Ceramic Headlight Restoration Professional Detailer Pack (50 Step 1 Oxidation Removing Wipes) - Easily Remove Oxidation from Old and Faded Headlights

My car has been in desperate need of new headlight covers, but I wasn't ready to throw in the towel. This kit did exactly what was promised and restored my headlight. Saving me over $500 to replace the light covers.Please follow all of the instructions very carefully. They even have a step-by-step video for ease of use.*note* my headlights had extremely deep oxidation that the kit was unable to correct. However, it still restored the quality 10x over. They tell you that it doesn't get extremely deep or reach oxidation on the inside of the light, but it is still super effective. I appreciate the honesty.

This works amazing! We were not sure which brand to buy and researched many. We have never used anything on our headlights and weren't sure what to expect. We taped around the headlight with painters tape just in case and the process was actually pretty easy. There was enough to do both vehicles headlights, too. They look brand new now. We were quoted 300 dollars, at a local detail shop, just to restore headlights. This is why we decided to look into doing it ourselves. This is definitely worth buying! I would recommend this product to anyone and I would buy it again. No issues with shipping either and it arrived quickly.

This product works so well, the amount of effort and time you spend on it is far exceeded by the results, it's almost like magic. Look at my before and after pictures and see for yourself.The headlights I used this on were oxidized, I normally use headlight polish on it every month or so to clear it up but it takes a lot of effort, the results aren't amazing and it only lasts a few months. The before pictures show the extent of it after a complete wash and wipe down with isopropyl alcohol. The instructions were clear, though I did notice one typo, it mentions to use a red sanding pad followed by gray, but my kit came with red and green, I just assumed green for gray and it was fine.After washing the headlights you must dry it thoroughly and if you sprayed water all around, dry or soak up as much water from the surrounding area as possible. This is important, you don't want wind to move standing water so that it sprays onto the headlight at the worst time (like the clear coat step), take no chances. If you have an electric duster, an 18V job site blower, or an air compressor, use those to blow all standing water away.If you get water into the hood while washing, don't lower the hood until the headlights are fully done and you waited for the clear coat to dry/cure completely according to instructions. The hood in the up position can hold water in it, it has drain holes to drain water out when it's laying down flat, if you lower the hood before the clear coat is dry the water will run out of the drain holes right onto your uncured headlights, leave the hood up.Most of the time and effort you spend will be on the sanding step and that depends on the size of your headlight and how intricate it is, headlights with intricate designs and reliefs will be annoying, you'll have to use the sandpaper by itself without the foam grip and fold it and spend a lot of time on edges and corners. In addition to the instructions I highly recommend you mask off the entire surrounding area with painter's tape, make sure you fold the painter's tape over and into the gap between the headlight and the bumper or fender.The nail biting part is at the end when you're applying the clear coat, you obviously don't want to mess it up, you're undoubtedly going to notice you missed a tiny spot, despite the directions saying not to go over it in multiple passes, I did it anyway and it turned out fine, you just want to do it quickly before it has time to set. The clear coat is sorcery, it self levels, I even saw a few tiny air bubbles and those all disappeared, after an hour it was dry and the finish not only looked 100% clear, it was completely free of defects and texturing, it literally (I can't emphasize this enough) looked like a brand new headlight. I expected a clear coat applied with a small gauze pad to be uneven, have visible strokes and texturing (like brush strokes), instead it's completely level with no marks and has no texture whatsoever, when I rub my fingers over it the surface feels shiny, reflective, slippery, like a new headlight. The result was so good I kept staring at it for over ten minutes at all angles.The whole job probably took me roughly one and a half hours from start to finish including masking, washing and drying the headlights. The sanding steps take the longest, the clear coat step is done in a minute or two. Time will tell how long it will last, if it even lasts a year I'll be happy.The pictures show driver's side "before" (I didn't take a picture of passenger side "before" but it looked the same), then an after shot for both driver and passenger side.Some things about the "before" shot:1. It may look like light oxidation because you can still see through it, that oxidation is lighter than it normally would be, it hasn't been that long since I last polished it with headlight polish. Had I left it for a few more months it would have become totally opaque.2. If you're wondering why there's a sharp line where it becomes completely transparent, that's where the hood sits and blocks the UV (like a farmer's tan).

PROS: works well though not a magical transformation. no power tools needed. instructions are very specific and very clear.CONS: definite elbow grease needed, so if you have bad shoulder or arthritis,keep that in mind. somewhat time consuming (you'll need around 1 hr., plus one more after that for drying time).the real test will be how long it lasts. Will update review later.

This is the second time I’ve used this product. Don’t spend $80 or more dollars to have someone else clean your headlights. This product is made to clean them and keep them in good condition.The steps are super easy to follow. There’s a QR code you can scan for an instructional video which I found extremely helpful. This product has a warranty which speaks volumes. Any company willing to put a warranty on something you know we stand behind their product.The first step wipe is extremely gratifying as you see a lot of the UV junk come off. I would probably grab an extra pair of gloves or two and ensure you have a garden hose and or spray bottle with water readily available.The clarity on the headlights after cleaning was extremely noticeable and enhanced the brightness of the headlights. Many people have noticed the difference in the headlights since I have cleaned them with this product.This is a quality product at a great price point a wonderful investment that is easy to apply. If you or someone you know needs to clean their headlights this is definitely the way to go. I will continue to use this product in the future and recommend it to any and everyone.