6 Piece Set of Bosch OEM Glow Plugs 0250403008 / 80050 - Mercedes Benz / Dodge / Freightliner Sprinter 2500/3500 2007-2013 3.0 V6 Jeep Grand Cheerokee 2007-2009 3.0 V6

I replaced the glow plugs in my 2008 Sprinter Diesel. They fit just like the ones that I replaced and the light for glow plugs went out and hasn’t come back on. I used a torque wrench to get them to the OEM spec. Worked well.

Exact replacement for the 2012 freightliner sprinter 3.0 diesel absolutely no problems with my replacement.FYI pb blaster soak the glow plugs for 2-3 days prior to changing. The glow plug replacement needs to be done when the engine is as close to operating temperature as possible. “Suck part of replacement” (also why I did one at a time)Use the torque wrench to remove the plug/s, set it to the torque you install it and this way you know how much you can use on them “very small diameter with heating element inside, can/will be brittle” I put pressure against the glow plug and pushed until the torque wrench clicked and went back and click back click back click, if it doesn’t come, maybe have to try another day, I added 2in lbs on mine and it eventually came loose, took 50-80 clicks, spray with pb blaster and tighten it so the pb can go down threads “they are sticky from diesel sludge. Then it should be ready to back all the way out, if it clicks, pb again retighten then back out again. GENTLY! If you get impatient and break it off, the remedy is removing the head!!“I only replaced the bad one so far”For mine I read that using a little antiseize will be helpful for reinstall and later replacement, I believe you use a couple less lbs on torque wrench… I believe I used the standard torque anyway, antiseize is antiseize 🤷🏼‍♂️ sure don’t wanna ford blowing things out.I have had no problems and suggest this to any sprinter diesel owner, the caps for the plugs are a bugger. I used a needle nose vice grip and it was needed they sell pliers but they are cost prohibitive for owner with 1 van.YouTube videos of many different people so choose your type man woman old young for tips if necessary. SAVED $250-$450 on just the bad one so far.I recommend the seller and the product. Save yourself $20 per over part store too.

Liked quick shipping of these quality parts at a reasonable price

Parts arrived in timely fashion. However the postman crammed them into my locking mailbox. I was worried that one or two got bent. But all worked out okay.

Work great in my 2007 Jeep Grand Cherokee 3L Mercedes CRD Diesel

I have not installed the glow plugs yet after receiving them. The only concern I have is that packaging where the individual glow plugs came in where damaged and the boxes taped with shipping tape. This does not look good for any product. I validated the codes on the boxes as legitimate, but I did not see any markings on the glow plugs indicating they are actually BOSCH OEM parts. This is a valid concern because I would not want to be stuck with knock off parts.

Direct replacement for the OEM glow plugs in my OM642 engine. No more check engine or glow plug open circuit issues.

Fit 2007 Sprinter Diesel works good no problems

The glow plugs fit fine - the engine light did not come back and the Jeep is running great

Installé sur Jeep Commander 2007 3L V6 CRD sans problème. Identique à pièce OEM.

Prodotto di qualità ed affidabilità proprie del marchio. Adattabilità perfetta

Danke immer wieder

I bought these for my 2008 Jeep grand Cherokee diesel.Scan showed I had a bad glow plug on cylinder #5.A week later glow plug #2 failed.I could have got cheaper no-name brand but I was not willing to risk early failure or worse still one snap off and fall into cylinder.So Bosch it was.These arrived in a couple of days and were as packed described a matched set.Removal of old ones and install of new took a couple of hours.I used 1/4" drive socket (6 or 8mm, can't remember) and a wobble extension.I blew out are so no dirt falls inside and used lots of anti seize on threads.I used a torque wrench that measured pound-inches and torqued them up.A little tight to get to but no major challenge.I did verify #5 & #2 with my tester and sure enough were burnt out.Threw the other old ones out so I don't get tempted to use them.All in all a great product and good value.A little advice.When it comes to critical components like glow plugs, injectors don't try saving money.The original Bosch as it might cost you dearly.