TP-Link EAP235-Wall Omada AC1200 in-Wall Wireless Gigabit Access Point MU-MIMO & Beamforming PoE Powered Quick Installation SDN Integrated Cloud Access & Omada app White

I placed this upstairs to cover just the upstairs corner of my home. This thing puts out a wireless signal stronger than the enterprise equipment that it replaced. The enterprise equipment I had was a mixture of Cisco APs and Watchguard APs. I had them in use for a few years with adequate coverage and quality of the signal to all my devices. Eventually, the Cisco APs were starting to show their age and the Watchguard APs have built-in licenses that were set to expire. I placed this smaller device in that corner of the home to test it and it just took over the entire AP duty. I get complete coverage, more than I expected. That is in standalone mode. I purchased another one for the downstairs a couple of months later and still have not had the need to put that up because.. this thing is just rocking it. The setup was easy and all documentation is online and easy to find and understand. You can set these to be managed with an Omada controller which would help if you have multiple AP's to manage. The nice thing about the wall plate model I have is that it's slim low profile and that you can pass PoE on to nearby devices is pretty darn awesome to boot. Couple that with the abiltity to tap an ethernet jack in when needed for older devices. This is the AP most homes need.

Works like a dream. Used this in my existing omada system to replace an 8 Port switch in my living room that the wife found distracting under the tv. Installation and set up were easy, and with a few settings changes the connectivity and speed are reliable and fast.

Pretty good. A little complex to get connected. But once set up properly, they work great and look good. I had to use Chat GPT instructions to help me because it didn't like the way it was supposed to via the box directions.

Omada is incredible! Such a seamless and powerful pro-level network ecosystem! I am very impressed!

My third one, after finding that our 2012 home was wired with CAT5E cables, after which I converted the phone receptacles to Ethernet, and these are simple to install and control with a phone app.

I had previously asked here if TP-Link EAP235-Wall Access Point could possibly cover a 2-story 1800+ sq ft home, each structure is different but proper placement can help a lot. I installed mine on the first floor indoors in the center of an outside wall where there was a phone outlet 4-ft above the floor. The 2.4 & 5 GHz WIFI signal is very good to excellent anywhere in the house including the basement. The signal is usable to good in the backyard. The modem, router, HDHomeRun TV tuner were moved to the basement resulting in much less clutter where the equipment was previously located.

Working great..I have a bunch of tp link stuff..I have the 605 Router with Omada Oc200 cloud controller running the 615 and a outdoor 225 access points and all cameras and other clients are connected fine...Its all in the settings with these access points...You have to make sure the wifi channels are right and set the power to get the system to work right..Band steering is also working ok but i wish more of my clients would move over to the 5 stream.If you use the tp link router and cloud controller and there poe switches you can set up a great network..I i even use a firewalla purple that blocks all the bad..Hope fully they will make a newer version of this for the new wifi

Used to solve an issue with poor coverage for 5G band in my home office (3 walls including mirror and tile in path to main WAP). Yes, I had to make the dreaded attic trip to get a cable to it from my PoE switch, but after that little expedition was in the past, it has been pure joy. The unit is cheaper than the Ubiquiti one and I am getting 400Mb/s+ in my office now (my provider bandwidth is 400Mb/s). If you mount it very high or low (mine is mounted upside down, right below my vaulted ceiling), I recommend checking the radiation pattern on TP-links website before mounting it. I ended up mounting mine upside down (which works just fine since the TP-link logo text is small and won't look stupid when doing so) to 1) hide the connectors 2) optimize the radiation pattern

My network speed is 550 mbps, I got the whole 550mbps.. I use it with the controller oc200 .. This is the one to buy. Amazing and stable . Thank you

Good quality

(reseña para EAP235-Wall) Compré dos de estos aparatos para extender el Wi-Fi a las recámaras que están al extremo opuesto del router donde llega el internet. Anteriormente había usado repetidores que usan la línea eléctrica (incluso de la misma marca TP-LINK), pero siempre se desconectaban o fallaba la conexión. Aproveché que me mudé a un lugar nuevo para hacer esta instalación. Sí es más elaborado que los repetidores porque requiere lanzar cables de Ethernet (aproveché los ductos de la pared que ya existían), pero una vez armado queda muy elegante y discreto, además de dar internet de alta velocidad. Es importante notar que tienes que comprar por separado un injector PoE para darle energía a los access points. Y en mi caso, también compré un extensor PoE de 1 entrada a 2 salidas para cablear el segundo access point. Todo eso se consigue desde aquí en Amazon. La descripción del producto dice que está pensado para hacer la instalación del internet de un hotel o lugares similares, pero creo que es excelente opción para uso residencial. No me metí con VLANs ni nada de eso. Sólo le configuré el mismo SSID que el router para extender el internet por toda la casa.

Tut was es soll.

This WAP fits the bill perfectly - it looks great and works really well.