KZ07 PC BLACK COMPUTER MID TOWER CASE ATX M/ATX GAMING USB 3 INCLUDES 3 X FRGB FAN

Cheap and cheerful, obviously not the quality of a high end case but great for the price with 3 included fans which came fitted.The one issue is the space behind the PSU is TIGHT! I had to plug in the modules in order to get it in there as the drive bays are super close. Ideally the drive bays could be scooted back a bit to give more clearance. But it works it’s just a bit fiddly.The company has a* customer service! The acrylic side came cracked and I had a reply within hours, a new replacement panel in the post same day and it arrived the next day! Perfect.

I didn't like the clearance above the motherboard where most people place their radiators, due to size constraints I had to mount my radiator fans, on top of the case, thankfully the dust filter can be slapped on top of em for safety

I purchased this case for a bedroom machine i wanted to put together with my old i5 CPU for use as a work machine, printing and editing. it is absolutely perfect for what i needed, shame the fans are MOLEX and run at full speed, they are a little annoying, but apart from that im very happy with this case.

On paper seems reasonably priced and sized. The latter being the reason for purchasing. The included fans alone are half the price and suggested decent ventilation.However there are a few buts, hence 1*.1. No slot to channel mobo 8 pin power cable. In fact there was no means of running it under/across the mobo at all. In the end I pulled a top case fan, ran an extender cable (thinner wires) around and over the top of the mobo an screwed it in place. -1* for the faff, -1 star for the lack of opening for a core feature and having to yank the mobo out 4 times.2. All the cable channels are too small on 24 pin, 6/8 and 8 pin, plus the hdd locations. -1* (-3* total).3. Case looks like it has 2 5.25” bays. It is two, but only one opening, which is pants. One side of blanking panel snapped off for good measure when being teased out. So either I superglue it back in, or use a dvd drive. -1 star (-4 total).4. Now the good one… unable to use a dvd/bluray drive as back of the drive clashes with the 24pin input for mobo power. It could be my asus mobo, but really, this one is ******* amateurish. It isn’t even like it is a few mms… the drive sticks out 60mm. -1* being generous (-5* total). I guess I could drill 4 holes and reduce that to 30mm…5. Good points. The fans, I guess, I seated one of the top pair removed for access in the front, which has two slots available. Bit of a faff on the two mobo side screws, but it is doable. No stars as that should be standard and spacing should be better.6. Front panel isn’t badly set out and actually has a generous length of cabling. +1* (1* total). That attention to detail needs to be used elsewhere.7. Psu layout and cabling is pretty functional and gets it’s own fan, but desperately needs a good opening midway along the section and at the top as mentioned in 1. Potentially room for 5 drives, but due to the opening locations and the mobo positions, it is a faff to access. You get a transparent side window, but due to the openings, I ended up using a mobo extender and 2 sata power extenders into the back central opening it’s pointless when looking at the cabling.If the manufacturer wants some advice. Take the case, get a several mobo & psu iterations from the last eight years, put it together, and resolve the issues.If buying it, don’t plan on an internal dvd, get several mobo extender cables, take a jigsaw to the openings, and it’ll be functional for what you paid for it.

EXCELLENT CASE well designed and fast delivery.RECOMMENDED SELLER

Has a DVD slot but it hits standard ATX motherboard and doesn't fit. Fans are so noisy can only plug in 2 out the 3. They give off a low droning noise so I need to change the top 2 for silent cooler master maybe.It's pretty rubbish.

Room enough for easy install of motherboards with drives, PSU and cables nicely out of the way.

Screws for ATX motherboard missing. Case is very light, not particularly good for more expensive components.

Gehäuse sieht ok aus,die RGB lüfter sind ring beleuchtet sprich nicht so wie auf den bildern !acryglas seite ist auch nicht sooo passend da man immer leicht retchs links schieben muss um die löcher zu finden.Kabelmanagment kann man hier vergessen ,für office ok aber bei Gaming muss man ein Netzteil haben was Modular ist oder wo die klabel extrem flach sind.sehr unzufrieden leider da es für die preisklasse bessere gibt wie zb. Aero Cool gehäuse !