acegoo RV Recessed Ceiling Light 2-3/4” Full Aluminum 12V Dimmable LED Puck Light for Campervan Truck Caravan Boat Roof Under Cabinet Lighting, Flush Mount Cutout 2-1/4" (Sliver,Warm White) 4 Pack

I used these lights for overhead light in my campervan. Bright, warm, consistent color. Easy install

We bought the acegoo RV Recessed Ceiling Lights for a DIY camper van build. Used them in a wood ceiling we installed. They worked really well, looked good and provided just the right amount of light.

I chose these lights for the limited space I had in the ceiling of a cargo trailer I am slowly converting to be a livable kind of toy hauler. I have a temporary panel up to keep the insulation in place, and set these LED lights into the panel. Which was super easy to do after cutting the holes with a hole saw, and running wires to a switch by the door. They're powered from either a 12VDC power supply, or the battery/solar side if I don't have shore power.They add the perfect amount of light to the space, were simple to install, and look great. Highly recommended.

We bought these lights to replace the stock halogen lights in our 2009 Winnebago View. They install fairly easily and appear to be about the same brightness/lumens as the halogens.A couple notes:While the light color temp (*K) is alright, they are not warm white (2,700 to 3,000 *K). They are a bit above that. They have none of the 'orange' tint that an incandescent lamp has. They are clearly "cooler" than the halogens and my 'warm white' LED flashlight. Still, they aren't obnoxiously harsh either. I think most people will find their color temp OK, but that's subjective. We plan to keep them.The wire that the mounting clips are made from is very small gauge, very flimsy and flexible. It makes them a bit difficult to move into position prior to slipping them into the mounting holes, because they twist. Nothing has broken so far, but the mfr could increase the diameter of the wire. The spring tension itself is fine. By comparison, the lights in our range hood use much thicker wire for the clips (the spring tension is a bit higher as well).The aluminum body of the lights feels substantial and the light is well distributed.These lights solved a few problems for us:* They allowed us to replace the halogen lamps with LEDs of similar brightness (if slightly higher color temp).* We were able to replace the fixtures and lenses at the same time -- which was important since the stock fixtures were/are cheap and the lenses kept falling off.* Less energy use* Less heat generated. The halogens will literally burn you they get so hot. They actually melted chocolate in the cabinet above them! It's amazing what 10W can do.Bottom line, assuming they are reliable and long-lasting, they are a good buy.

These fit perfectly in the holes in by 2000 Beneteau. I only had to pull the old fixtures, disconnect the terminals, crimp new terminals on these fixtures and pop them in. They were a snug fit, but went in just fine. As has been noted elsewhere, the spring clips are fairly light, but seem perfectly adequate for the task. It's a bit of a change in appearance as these are more flush then the old glass dome/chrome ring, but once they're in place no one will notice. And the old ones were starting to look pretty tired anyway.Over the years, I'd replaced the halogen bulbs in the old fixtures with a couple of different generations of led bulbs - none of which ever were completely bright enough to suit me. I was looking at doing another round of replacements - but the bulbs are around $16 each. These fixtures were half the price and 2x as bright! The light color is excellent, and they are so bright that I've paired them with the Acegoo dimmer since I won't want them at full power all the time. When considering dimmers, make sure you get one that works on just the + leg of the circuit - most 12v systems run a separate ground lead for the fixture that doesn't come back to the switch location. The Acegoo dimmer is one of the few that is designed like that.

I purchased these lights strictly for lighting my shower stall of my 2005 Jayco Eagle. I've been a full time camper going on 3 years now and this is a major upgrade for my 12 year old camper. I choose these lights mostly for the moisture resistance they claim to have. Installation was a breeze for those who are wondering. The spring clips literally suck the fixture into the hole once they are in place. I used 18 gauge wire and soldiered and heat shrunk connection points. For cutting the hole I used a 2 1/4 inch hole saw works perfectly for spring clearance once they are folded back. The lighting is perfect and evenly distributed throughout my shower. I've only had them installed for a couple of days but I'll will be sure to update in the future.Update: April 19, 2017This Friday will be a month since I first installed the recessed led lighting. So far they are illuminating just like they were when I first installed them. They cumulatively are on for at least 4 hours and experience at least 5 or more on off cycles per day. They seem to tolerate the moisture and condensation and I haven't noticed any oxidation under the fixture coating. My only complaint is I wish I would of done my research on color temperature before I purchased the cool white version. In comparison the color temperature is equivalent to an iPhone flash light, since it is only in my shower I can deal with it. As of today this product still deserves 5 stars in my opinion and I would buy again.

These work very well. But, make sure you fully read the description! I didn’t. Ugh! These are too small for my needs but, I will keep them because I’m sure I’ll have a future use for them. They are bright and can be dimmed.