🚗 Light Up Your Drive with Style!
The SIEMID New Generation LED Fog Lights are designed for a wide range of Nissa.n and Subar.u vehicles, offering a powerful 10-watt output and a waterproof build. With a unique hyperboloid lens design, these fog lights provide enhanced visibility and versatility, making them the perfect upgrade for your vehicle's lighting system.
Brand | SIEMID |
Color | For Nissa.n Subar.u |
Specific Uses For Product | Fog Lights |
Vehicle Service Type | Xterra,Frontier,Titan,Sentra SE-R,Pathfinder,XV,Crosstrek,XV Crosstrek,Legacy,Outback,Forester,Forester XT,WRX,STi,Leaf |
Year | 2019 |
Special Feature | 防水 |
Wattage | 10 watts |
Auto Part Position | Front |
Lens Color | Clear |
Lens Material | Polycarbonate |
Item dimensions L x W x H | 3.54 x 3.54 x 3.15 inches |
UPC | 782912838123 |
Assembly Required | No |
Manufacturer | SIEMID AUTOLIGHTS |
OEM Part Number | 26150-9B90E, 261509B90E, 26150EA025, 3152020NAC, 5377365Q |
Item Weight | 9.2 ounces |
Product Dimensions | 3.54 x 3.54 x 3.15 inches |
Item model number | 26155EA825 |
Exterior | 抛光 |
Manufacturer Part Number | SMD-LED-FOG-FD |
Special Features | 防水 |
J**K
Amazing! Love these lights.
Bright and beautiful. Great light pattern. Works perfectly. I should have upgraded sooner! Fits Nissan Frontier.
D**I
Perfect fit on 2011 Xterra
These are great lights. Designed so they don’t blind other drivers but throw a very wide flat beam. Easy to install; 3 screws to pull back the inner fender liner, 3 screws to remove the light housing, and unplugging the factory harness.Highly recommended.
M**C
Clear defined light field and bright
These fit perfectly in the front lower valance of my 2006 Pathfinder. They are not listed as fitting my vehicle specifically but they are a perfect replacement for broken/inop fog lights. Easy to adjust after I filed out a slot in the frame with a round file. Would definitely buy again.
A**E
Absolutely love them, they light up like no other
Absolutely love them. True OEM replacement and light up the road very well, specially sides so you can see deer and any other folks crossing. Great buy for my 2019 Pathfinder. I was blind and can see the road now. Thanks
P**Z
Worth installing.
Best thing its the look it gives. Easy to install just as described. The only downside its it could be brigther. I left them installed because still do the job. Its installed on a Nissan Frontier.
W**Y
Don’t upgrade your headlight bulbs till you do this first
These are brighter and more useful than my 2017 CMax Energi projectors w/ 55w HID conversion. So I already have great headlights. That photo is with just the fog lights on. The garage light is on too which is why part of the top half of the other car is illuminated.There’s nothing you can do for your headlights that will be on par with this unless you open them up and completely replace the factory projector or reflector system with a new LED integrated projector. No bulb or HID kit it going to get you this when the main issue is your existing reflector or projectors.I have decent stock projectors my headlights are $1800/ea OEM. But they are designed for halogen so they suck. They pale in comparison to the LED system in my BMW i3 EV or Bi-Xenon projector in my Bolt EV.
A**N
Exact Replacement
Exact replacement. Only needed to replace one broken fog light on my 2015 Frontier but ended up replacing both. Brighter white light made the old one look yellow. Easy to install, only took me roughly an hour to get the old ones off and the new ones.
T**Y
Defect from the start.
I was super excited about installing these in my 2011 Subaru Outback 3.6R (is it freaky THAT hard for other reviewers to include their car model in their review????). Upon receipt, they both had their plastic front lenses covered in protective film (like saran wrap if you're from the US). This appeared to have successfully protected the front lenses as they are plastic. Install was literally DROP IN. Finally. Very very pleased with how easily and quickly they went into the bumper.I peeled the protective film off and installed them. Upon beginning the reinstallation of the cars front bumper assembly (a non-trivial effort, I might add), I discovered that the internal curved glass lense off one of the units is clearly and obviously covered in scratches, finger prints/smudges, or both. Mind you, there is zero way to disassemble these units and no effort was made to do so. Hence 1-star.I got 95% towards reinstalling the front bumper before I noticed this defect, which was conveniently hidden by the blurry protective film. The units sit with little stability when they are out of the package and one gets a quick understanding that this film is provided for good reason, so I had no incentive to remove the film except during installation.I'm not saying this was intentional. But how this half of the pair made it through even the most rudimentary QC process evokes excuses such as: magic, space aliens, my dog ate my homework, etc.I was really excited, but that's been diminished nearly entirely. My wife has to be able to drive her vehicle tomorrow, so I'm left with uninstalling the bumper AGAIN, reinstalling the old OEMs, and then reinstalling the bumper AGAIN..... or putting in the last few plastic body clips and not ruining the rest of my Sunday Afternoon plans.I have elected to not further ruin my Sunday. I lose. Not happy. I would day to avoid this product. It's a lottery.
Trustpilot
1 day ago
2 months ago