![45 x 52 mm Clear Perforated Shrink Band for Hot Sauce Bottles, Woozy Bottles, Tubes, and Other Narrow Containers [Compatible Diameter Range: 3/4" – 1”] - Bundle of 10,000](https://images-na.ssl-images-amazon.com/images/I/619cr2YPNtL.jpg)






Color:E) Pack of 10,000 (Clear)  |  Size:45 x 52 Fits 3/4" - 1" [19mm - 26mm] What you are purchasing here are 45 by 52mm (Layflat Dimensions) tamper seal shrink bands that work best for hot sauce bottles, tubes, and other narrow containers. Directions: Place shrink band around the lid of the bottle that you will be shrinking it to. Apply heat with the use of a heat gun or heat tunnel. I don't recommend using a blow dryer; it's possible but not worth it unless you're only doing a small quantity of bottles. The shrink bands are easy to heat and durable. Have any questions at all about the shrink bands? Just send me a message and I'll get back to you as soon as I can!
J**.
Perfect fit, easy to use
I ordered these bands to seal my 2 ounce amber eye dropper bottles that I use for herbal tinctures. They worked great! I used my hair dryer on low power with high heat, and while it takes a bit of time it worked on the very first try. I also used a pair of tweezers to push the plastic downward because as it was shrinking it would creep up the neck of bottle instead of staying around the base of the neck. The size was perfect and it wasn't difficult at all. I'm very pleased with the results!
A**X
Awesome Product and this company is in my top 10!
These shrink bands are great quality. Keep the heat low or you could melt them but I think that was a learners curve. I speak out of my first order of these from this company. This is my 3rd now. These bands shrink great and when you want to open them they have 2 perf lines on them to make opening the seal easy. I make my own E-Juice so safety and tamper resistant is a demand. Even when the bands you buy from them are TOO big they will still shrink down and fit, within reason. My only issue with this exact product is I ordered them not long enough so they will not get used but I have already placed another order with Supplement and Supply to get the correct size. Hey, my mistake, I'll eat it :) As for the company ....This company makes a quality product, ship very quickly and communicate well with it's buyers. I would put them in the TOP 10 on my list, and I run a business and buy a LOT from amazon.
G**D
Didn't work for my bottles, but it was the bottle shape's fault.
These little heat shrink wraps performed just as expected so I can't ding their effectiveness because of my bottle shape. On most bottles, you have an extra lip at the bottom so that the shrink wrap could wrap underneath and give you a nice secure hold. Because of my bottle cap shape...these shrink wraps just give the cap a nice "hug" but the bottle cap could just as easily be unscrewed, with the wrap on it. I'll keep the 500 I purchased for other bottles, I'm sure I'll find use for them. They performed just as described. Very easy and if one didnt wrap evenly..you could heat it up a little extra and fix the mistake. Just watch out for overheating them because the perforation can split with too much heat. Great little wraps!
L**M
Nice Shrink Wraps
I use the oval lip balm tubes. I was unsure whether these shrink wraps would work on the oval tubes since the description didn't specifically say that they would. They were a little shorter than I've used in the past, but worked out fine. I like t-perforation - makes it easier to open and leaves the bottom of the shrink wrap on the tube protecting the label.
K**N
Works great
I wasn't sure which size to get for a 70mm jar size since it was right in between two sizes. I messaged the seller and they responded right away. Took their recommendation and purchased the 115x28 size and they ended up fitting perfectly on the jar. A couple tips: Use a heat gun instead of a blow dryer. Although you can achieve the same result using a blow dryer, it takes longer to get a seal and just isn't as efficient or consistent. Make sure your jar/bottle has a lip/edge for the band to snag onto when shrunk. If you have a straight sided jar/bottle the band will slip right off since it won't have anything to hang onto or prevent it from being pulled off.
N**A
Be sure to REALLY measure and consider the different sizes. Go smaller if in between.
It is what it said it was, however, I have bottles that are 18mm wide in diameter. I bought the 45 x 23mm shrink bands and they were too short and a bit too large. I could get them to shrink around the width but the length was too short to cover the top and the part that twists off. If anything, I recommend erring on the longer size so it truly seals and smaller so it is tighter around your bottle. Otherwise the product shrunk as expected, it just wasn't the right size for my product.It was also difficult to get it to shrink evenly but again it may be because I had the wrong size.
N**E
Worked great!
The bans worked really well, I did buy a size too big for what I needed, but they worked so I was pleased, I'll know in the future to get as close as I can to the size I need. But I was very happy I didn't need to return them. They made my homemade Christmas gifts look really professional, in fact so much so that one of my bosses thought I bought my gift and not that I made it. (It was tins of mulling spices, I made a custom label & used these seals so the mulling spice wouldn't lose flavor too quickly). And using my hairdryer worked just fine, although I did see that you can pick up a heat gun from local stores for as low as $20Will definitely buy these again for future gifts.
B**Y
Protect
They fit my dropper bottle perfectly and have the bottles a more professional look for my business.
S**Y
will be using agen thank you sandra
fast delivery brilliant shrink rapes for bottles
V**Z
Thanks AMAZON.
These are perfect and very good quality. Thanks Amazon.
B**2
VERY SATIFIED glad I didnt pass them by. Worth every penny.
ABSOLUTELY LOVE THESE. not only now seals the bottles for potential leaks and have a "tamper evident" seal now but they also look very professional. Even with a hair dryer. Yes a darn hairdryer will work. Get a good hot hiar dryer practice a few times and if your like me you will have professional looking seals after less than 5 tries with a HAIR DRYER! A heat gun maybe nice and someday will get one but damn I got the hair dryer technique down pat so its really not a big deal for me. Heat gun would be better for directing the heat in the areas you want but nice hot hair dryer works fine. I got the standard size and works on all my Boston round glass bottles from 15ml to 50ml however for some people different covers and styles will require different size shrink neck sizes. VERY SATIFIED glad I didnt pass them by. Worth every penny.
K**N
Works well
I bought these for another product (not lip balm), hoping they would work. The items are a smidgen wider than a lip balm tube, so they didn't slip on at all. But, I simply tore off the perforated top, and used it just on the top of the bottle and it works like a charm! ... I used a heat gun on low setting to shrink the wraps and the first three took a bit of learning. Don't heat from the top down, start at the middle and work your way to the top then bottom and they will shrink nicely. Great quality. Will buy again.
J**T
They work well.
A bit tricky to use but very good once you get the idea. Also, open it up properly before shrinking. They don't need too much application of heat in order to shrink up.
Trustpilot
1 week ago
2 weeks ago