🚚 Elevate Your Ride with Style and Protection!
The Bushwacker Pocket/Rivet Style Front & Rear Fender Flares are a 4-piece set designed specifically for the 2007-2013 Chevrolet Avalanche with a 5.3' bed. Made from durable Dura-Flex 2000 material, these fender flares offer maximum tire coverage, easy bolt-on installation, and a rugged aesthetic, all while providing built-in sun protection to keep your vehicle looking sharp.
Color | BLACK BEIGE |
Brand | Bushwacker |
Material | Stainless Steel |
Vehicle Service Type | Truck |
Fit Type | Vehicle Specific Fit |
Auto Part Position | Front |
Installation Type | Bolt-On |
Finish Type | Powder Coated |
UPC | 090689107862 |
Manufacturer | Bushwacker |
Global Trade Identification Number | 00090689107862 |
Model | Bushwacker 40932-02 |
Item Weight | 20 pounds |
Product Dimensions | 52 x 11 x 34.38 inches |
Country of Origin | USA |
Item model number | 40932-02 |
Is Discontinued By Manufacturer | No |
Exterior | Painted |
Manufacturer Part Number | 40932-02 |
OEM Part Number | 40932-02 |
B**A
Fender Flares
Flares looked even better than I imagined, lower profile than expected and really does look great! What a great addition to my truck. Price I thought was just a bit high but I’d recommend these.
J**D
Great product as a great price!
These Bushwacker fender flares fit perfect on a 2007 avalanche LTZ 4x4. Directions were good, but be careful with where put the edge trim. Form fit first and note edge trim does not need to go on any edges that go under fender or the lower front edge of the front flares. Longest part is installing the edge trim. Overall a fairly easy install.
P**A
Bushwacker Fender Flares - A great product.
These Bushwacker Fender Flares are overall a great product. It has that visual appeal where it adds that "aggressive-look" to my truck. It also acts as a great protective barrier in lieu of the traditional mud flaps. It's definitely a great investment and installation was not that time consuming (took me about an hour). I'm definitely satisfied with this product.
J**D
They look so fine
Have a black 2013 Chevy Avalanche all chromed out and these look so good on it. Want to give it 5'stars but the rear fender flares do not fit 100% at the apex it does not have a tight seal against the truck like the front ones. Currently in contact with Bushwacker and hope they can fix this as again they add so much style and protection and I would really lies them to fit.Will update after working with Bushwacker
R**.
Wrong parts in box!
Actual product is ok but only received driver side fender flares, no passenger side, there is 4 in the box , all 4 are for driver side, 2 for front right and 2 for front left, how is that possible?
S**R
Good quality easy install
These were super easy to install Product came well packaged no damage or scratches and fits like a glove. (For those this may help these flares WILL FIT 3rd gen yukons and suburbans as well they both share the same fender dimensions as an avalanch took me a long time looking to find that information)
K**.
Fenders
Love these!Sets my Avalanche above the factory look!
A**R
Somewhat difficult to install
I installed these on my very low mileage 2008 Chevy Avalanche. After the installation they do look like they came with the vehicle from the factory and I am satisfied overall.However, there were several issues along the way. I did not intend to paint mine and ultimately did not have to. But the packaging for shipment was pretty bad and they arrived very scratched and marked up. It took me a good bit of time with a light scotch-brite pad to get them looking right again. Then, the installation was quite a challenge. It requires quite a bit of pushing and pulling to get them lined up to install the fasteners. Some of the pre-drilled holes were a bit off and required some massaging.Thankfully, I did some research before installing these for the final time. After reading other reviews and watching some YouTube videos, I learned that the rubber gasket that comes with these does not fully protect your vehicle paint over time. I ended up ordering some protective clear 3M tape in a kit from a company named Sharp Truck. This tape kit was expensive (around $120.00 at the time I ordered it) but I feel very comfortable that if I ever want to remove these fender flares I will be able to do so and not have damaged paint that would be expensive to repair. Unfortunately, using this kit required installing the flares, marling their exact location with marking tape, then removing them again. Then, using the marking tape as a guide I installed the clear protective tape and then had to install the flares a second and final time. If you aren't worried about damaged paint under these flares and know you will never remove them then this would all be unnecessary, but I opted to take care of my vehicle.Again, I will say, these look really great and after the effort, the fit and finish is really close to perfect.
P**T
Excellent
L'ajustement est parfait fonctionne très bien sur mon Avalanche LTZ 2009.Je recommande.
K**N
Installed on the truck and couldnt be happier with the look
Installed on the truck and couldnt be happier with the look. Got them painted to match and it changes the look of the truck. Its a persons personal choice if they like them or not. I myself do, so was worth it. Price was lowest I could find anywhere online or locally.
A**R
Good quality
arrived within a few days
A**D
Fast delivery exactly as shown
Ordered for my 2007 Escalade EXTFit perfectly
S**T
not painted , come scratched , not worth money
cheap , not worth the money .... says paintable but it would seriously cost u 100's of dollars to paint
Trustpilot
4 days ago
1 month ago