PLA 3D Printer Filament,Glow in The Dark Filament, Glow Green/Blue 1.75mm(2.2LBS) Accuracy +/-0.05mm for Ender3 Ender5 CR10

My wife picked this for me to print her a few projects she wanted. It was easy to print with and the quality is good. The color change in sunlight is cool. I did dry it for 3 hours before printing but that was just because I was already printing something. So I don't know if it was wet upon delivery.

Wow, this is some amazing filament! I print with nozzle at 205° and bed at 60°, usually have bed at 50°, but this seems to need a bit more heat. The colors with this VERTIGO GALAXY RAINBOW are great, the print amazing and the feel of the finish piece is like nothing I’ve ever printed, just wonderful.I’ll be trying one of the other colors, certainly, but will be searching for the right models to print with this filament, for sure! Happy printing for all!!May 2023; I just purchased a roll of the Galaxy Glitter Black filament; although I would describe the color more of a glitter gun metal grey, not deep or dark enough to call black. While it looks good printed, it takes some effort to get the setting right in order to get good bed adhesion for the first couple of layers. Stronghold3D’s settings recommendations vary a bit between what they list here and on their website with temps and speeds. This being said, I am finding the following tweaks are helping with good first layer adhesion and smooth prints: light layer of glue stick made the greatest difference, 220°/50°, 35 mm/s speed and set your initial layer width to 120%. I also added a brim to the prints and that helped immensely. No one or two of these changes helped alone, but together I’m not having issues.The price of the Galaxy filament is very good, as is the finished print, so I probably would buy this again. When my project is complete, I will add pictures more pictures to this review.

Normally, this is good filament. I have used many rolls for my business and had 3 printers running 24/7 for 4 weeks during Christmas without any failures. This filament made us a lot of money retailing toys. I got some toy orders last week and needed to order rainbow filament. I went to order my go-to Stronghero Rainbow PLA. Loaded up 3 printers to print my orders and chaos. Some prints were spaghetti, other would print a few layers then separate and others would just stop extruding.I spent 2 days rebuilding extruders but didn't seem to make any difference. Finally, I selected a much smaller part than what I had been trying to print and used a remnant roll from previous prints. The pictures are from the same printer.Picture 1 was using the recently purchased filament. Ultimately, the filament had jammed and was not extruding. While retracting the filament, it jammed and broke in the feed system on my K1 and I had to disassemble the feed system to remove the filament piece. Note the manufacturing code 24JAN016003.Picture 2 was using the remnant roll on the same printer immediately after the print in Picture 1. No change in settings, just used a build plate from another machine and selected the file and printed. Note the manufacturing code 26AUG010003.Picture 3 was immediately before these prints because the extruder was jammed and would not load filament. Notice the nice blob of filament jammed in the filament path. I also cleaned each of the gear wheels to remove residual plastic.To summarize: This is a bad batch of filament and have a return in process. This manufacturing code is dimensionaly unstable at a minimum.I will try to order the Stronghero filament again (different mfg code only) and hope this is just 1 batch. I will gladly give this 4 or 5 stars if the quality returns to where it has been before. I really want to like it again.

Really cool looking results from any 3dprint. Settings same as any PLA. Quality finish and very cool colors

As with all of these type of filaments in my experience, the color change takes too long. Even with high infill rate, it’s not as apparent as I’d hoped. The darker color shown in the photo doesn’t seem to be there. The quality of the print is outstanding though. Very unique color.

I have been a fan of Stronghero3D for a while now from the PETG side of things as they have colors and finishes that no one else seems to have. I decided to give this filament a try as I really liked the look of CookieCAD's Witchcraft PLA, and this seemed pretty close. I don't know if Stronghero3D was trying to mimic the other filament or not, but for me it was hard not to draw a comparison because they look so similar to each other right up to the point where you compare prints side by side.I have to say this filament prints really well, and I think I like it slightly better than the Witchcraft PLA. in the samples pic I included you have this filament printed at 220c on the left, printed at 230c in the middle, and Witchcraft PLA printed at 220c on the right. I think the 230c of this filament turned out more iridescent than the Witchcraft PLA, so I will be staying with this filament.I have had a lot of fun printing various things out of this filament and will be getting another roll when this one runs out. I hope Stronghero 3D keeps coming up with fun new colors and styles.

This is a VERY difficult roll of filament. Adhesion struggles, and even when i start a print with another color and switch to this one- the print eventually fails under circumstances that all my other filaments thrive in. Very brittle, bad adhesion, very low quality. You will end up with more spaghetti out of a roll then you will finished prints

I was a little disappointed as I’m in love with this rainbow filament, but mine came with little divets every foot or so causing constant clogs & the filament kept breaking inside of my AMS. This was the first time I had to completely take apart my machine to get the clog out since owning my printer, & unfortunately replace some parts🤦‍♀️

I absolutely love this filament. I didn't even have to fiddle with print settings, generic settings worked out perfectly. I have been looking for such colour shade (black with hints of red) for a long time, and it absolutely meet my expectations.

The filament printed ok. The brim pealed away easier than some other filaments and seemed a little more fragile than most brims but the end products turned out good.

Bonne couleur, parfait

El filamento esta muy bien, pero la entrega del paquete bastante malo, me lo entregaron dañado

alles ok