TENLOG Hands 2 Independent Dual Extruder 3D Printer,300 Degree High Temperature Nozzle,Upgrade Borosilicate Glass Bed and Silent Mainboards TMC2208 Drive Support PVA TPU PLA ABS,220x220x250mm

The media could not be loaded.  it was easy to set upquick to level the bed,second nozzle is bit of pain trying to adjust,but when your sorted your awayduplicate mode is my favpteg prints well., white in the pics is the ptegfirst layers do go down if your z hight is good.

I had high hopes for this printer, being my first IDEX printer and a lot more expensive than my other printers that have worked perfectly well. Unfortunately I have been having lots of trouble trying to get any prints to adhere as the bed is so warped. Using the levelling function in the menu (just buttons to move to each corner) is useless as you can level all 4 corners as best you can but the middle of the bed remains at least 0.5mm away for the nozzle! I need to lower all corners much further than they should be just to counteract it, but this risks scratching the bed in these areas.When I do manage to get a print to go down, the quality isn't too bad at all, and the dual colour printing has worked well. The software is a bit buggy at times and in serious need of an update but its little things you can work around.Overall, this is a printer that has a lot of potential but is majorly let down by the warped bed it came with. Tech support were not interested when I questioned it and told me that I just need to adjust the levelling whilst watching the first layer on every print...not really the response I had hoped for.

The media could not be loaded.  The Tenlog TL-D3 not only can print 2 different filament or different colour but to print it independently to each other. You can scale up print speed by printing two of the same file at once or have a mirror image printed as per my spiral vase.The D3 PRO is half assembled and need medium DIY skill to put together, there is lots of installation video online which will show you how to put it together. It took me 45 mins to built the printer and then another half hour to learn how to print from it. All in all less than a couple of hours and I am printing my first duplicated printsPrinter is not dead silent but a low humming noise from the fans, definitely better than the 1st gen 3D printer. The prints so far is very good and I have better result with custom stl files than the test files from Tenlog. I find Cura 4.4 work without modification with the D3 PRO and the later version software requires update with custom printer profile which is out of my depth at the moment.There are cheaper dual colour/extruder 3D printer out there but this is the cheapest INDEPENDENT dual extruder 3D printer I can find which you can print 2 object at once, there are modification to make it 4 heads on the internet which I will definitely check out as I want to scale up Prototype samples

The media could not be loaded.  Although me and my son are newbies to 3d printing, we have been investigating it for some time. One thing I wanted was a printer that I didn't need to be changing the filament on when printing a dual colour model. This solved that problem and linked with the ability to duplicate print, it pretty much ticked the two big boxes.You will see on the video I've done, just how easy it was to assemble and using the files from the manufacturers website along with the setup files that came with it, we are off and running....If you don't watch all of the review video, there is a part where I explain a problem I was having with the prints coming off the heat bed, this was soon solved by increasing the temperature of the bed.All in all, we are a few weeks into this now and have found some excellent files that we have printed, my favourite was the attachment to the camera strap that lets me attach the lens cover to it so I don't lose it. This is pleasure to use, relatively quite to say the fans are running and a touchscreen that works smoothly and allows good interaction. Perfect

My first venture into IDEX printingThis machine is incredible. Setup took less then an hour, following the video tutorialI particularly like the dual INDEPENDANT Z motors, which make the X axis perfectly level all the timeAligning the extruders is a breeze, far better than any of my other Dual Nozzle printersCalibrating the printer can be done "on the fly" whilst you are printing, by small adjustmentsIF you need bigger adjustments I suggest restarting the print or lots of small stepsPrints are of a decent quality out of the box. As with most printers, the more you learn from it, the better quality you get.The printer itself is near silent. Can only hear the fans when they kick in.Controlling the printer is a breeze with its decent size touch screenDuplicate and Mirror printing is all done from the machine, as long as you remember placings in slicersIF I had one complaint about this machine it would be that there is no nozzle brushes supplied, to wipe the excess filament, while the nozzle is waiting to print.These are purchased separate or can be printed

This printer is efficient, and produces a lovely quality product. Set up was relatively straight forward HOWEVER the manuals and tech support are next to useless. You can contact the customer service or tech support in China but obviously answers take quite some time. So I wouldn’t recommend as a first time printer. However I have added this to my current stock and production has tripled. Lovely useful features. Would recommend for anyone other than a novice.