Graphics Card Support Bracket,GPU Brace Video Card Sag Holder/Holster,Single or Dual Slot Cards (Black)

Just what I needed. Vid cards nowadays are so big and heavy, this takes the strain off of it.

On a new build for a relative I used a EZ-Fab arm type support with a RTX 3080. It was difficult to get it adjusted correctly and if you want to remove or add a card to the pcie slot below the gpu it has to beremoved and adjusted again. I just upgraded my gpu and decided to use this. It literally took me a coupleminutes to install this support. My only concern before buying was about the strength of the magnetin the base but it grips the case very well. This will work in a case with or without a PSU shroud. The arms and base have rubber contact surfaces to prevent scratches and isolate any vibrations. Very well constructed.

Easy to use -- just turn your PC off first. I went in without my anti-static wrist strap like a fool and it crashed my PC. Everything is still working but you never know if you corrupted something being careless.It has a magnet on the knob that acts as a base for the stick when screwed in. It comes with two sticks that screw onto each other as they are shown in the pictures. I never checked to see if just one would work but I wouldn't be surprised. There are provided 2 metal GPU supports which can be moved up and down the stick and then tightened once you're satisfied with the balance of the GPU, which comes easy because the seller provides a measuring tool as shown in my picture.I recommend purchasing 3M rubber feet to stick to this product so that your case & GPU don't get scratched. My Red Devil 6700 XT is metal, as are the GPU supports.

This Graphics Card Support Bracket, GPU Brace Support Video Card Sag Holder/Holster, Single or Dual Slot Cards (Black) is just SUPER. The QUILITY of this Product is just SUPER ! Everything fits together just right and looks First Rate, from the box to every part.I WOULD OF LIKES THE STAND A LITTLE LARGER, BUT I'M SURE THST THIS DIZE WAS CHOOSEN TO MAKE IT FIT ALL COMDITIOND ! It is padded very well and as I've stated before FIT AND FINNISH ARE PERFECT !I'm using this to help hold up an AMD RADEON RX 5700 RM VIDEO CARD which is Large and Heavy. My ASUS Motherboard is kind of lite and bends very easy. My Computer Case came with a PIN GUIDE and not a regular PIN and SCREW for the Center MD Mounting PIN and SCREW. I removed and replaced the PIN GUIDE, buy the Motherboard is still bendable. SO MY SETUP NEEDS THIS Graphics Card Support Bracket very, very badly. *** SO IF YOU NEED A SUPPORT BRACKET - BUY !!! THIS ONE !!! ***

This is one of the better quality ones on Amazon. It comes with two poles, you can either thread in just one, like I did, or thread in two, for higher extensions. The little pegs have a rubber insert in them to provide some vibration dampening and softening when pressed-up against the GPU face, to keep from marring it. It also comes with a little level that fit perfectly into one of the notches on my GPU's rear backplate, and let me get a perfectly level support. Really impressed with the details on this one. I bought the kit thinking I would modify it and make a permanent mod to my case, integrating it into it, but the fit and finish of the product itself is so good I think I'll just keep it as is for now. As you can see from my pictures, this little stand is applying a significant about of support as I've tensioned the heaviest GPU on the market against the peg and it's supporting it just fine. A+

The perfect solution to my problem, does what it needs to do and it looks good. It's sturdy. The adjusting knobs on the side instead of the rear is why I chose this one, has a slimmer profile and easy to adjust the screw for me on the side and impossible if it was on the rear in my case. Grab one..

I bought the GIGABYTE AORUS GeForce RTX 3080 GPU. I honestly didn’t want this card but got “lucky” in the Newegg Shuffle. This is a four slot big heavy card. I installed it in my case, LIAN LI LANCOOL II MESH PERFORMANCE. After installing the card and tightening down the screws as much as possible there was still significant sag.This GPU brace was a great price, felt sturdy and the finish of the metal was nice, matching the black interior of my case really well. The included level was really convenient when setting the brace position.

A quality build.I would buy again.The height of the support can be changed depending on the number of supports you connect together.