CURT 13434 Class 3 Trailer Hitch, 2-Inch Receiver, Fits Select Jeep Gladiator JT Pickup Truck, Black

Good product, I had to do some fabrications to fit it. But over all is reliable product

Perfect for towing boat

Installed in Gladiator. Easy install, but be aware you have to have the larger socket to tighten the bolt. I had to remove my bumper but it was just 4 bolts. Let it hang and didn’t disconnect the electrical parts. It won’t be secure unless you have that large torx bit. It is not included but they are about 5 bucks on Amazon. Much more at box stores. Doesn’t stick out past bumper.

Easy installation. Works great. Watch YouTube videos to make installing it a little easier. Also recommend taking the bumper cover off instead of drilling through it. Looks a lot better.

It is as advertised. Have not towed or used it yet. Installed today.Pros: lighter than others, cheaper than others, easy install (if you remove bumper) seems pretty sturdy.Cons: they do paint in the threads for the main bolt. You need to use a wire brush to remove paint from the threads first and check to see if you can get the bolt in before taking your bumper off. I used some wire bore brushes that attach to a drill to remove the paint. Ordered those on Amazon.Comments: you will need a 1/2 inch hex head bit to fit the main bolt. It is really a big screw. That one takes 320 lb-ft of torque. The bit I bought was a 3/8 inch drive. Used a kobalt adapter to go from my torque wrench 1/2 inch drive to the 3/8 inch drive. Snapped my adapter before I got to 250 lb-ft. No way to get it tighter but I think it will work fine for my intents. If you don’t plan on towing much weight or like me, the gladiator won’t tow much, save some money and get this.