SEALIGHT L2 H11/H8/H9/H16 LED Headlight Bulbs, 24000LM 100W 800% Brightness Night Driving Vision, H9 H8 LED Low Beam with Cooling Fan, Plug-N-Play Halogen Replacement, Pack of 2

The bulbs are just as I wanted them to be , I am actually using them as lower beam , th y are bright and not blinding the drivers on my way or opposite way.

Super easy to install, came with cloth gloves so you didn’t mess up the LED lights with your hand, (oils on your hands can make the light blow). These lights are brighter and better than I expected. Definitely worth the price compared to other lights of the similar quality. Definitely would get these again.

Cannot clock the LED in order to be installed correctly in my housing. Unacceptable beam pattern because of this.Plenty bright though

Instale las unidades en los faros neblineros, para emparejar el color del xenón original que trae el automóvil, son un poco más azules los led, pero mucho menor la diferencia que con los halogenos :)

Very bright, lights up the road at a great distance. These are much better than anything on the U.K. market for the same price. I recommend!

Bought the 9005/HB3 & H11 Lights for the 2019 Nissan Titan Platinum Reserve and they both work great for the truck. Packaging is nice and the Double side pads it comes with to stick the "controllers" to the body were easy to work with for the fog lights. Hopefully they will stick well this winter but only time will tell on that but the lights seem quite well built - The H11 fog lights are close to the road/snow/gravel and with having fans... I guess we'll see how they hold up but so far they work great and the 6000k are a perfect colour match for the OEM low beam Projector lights! The 9005/HB3 was more difficult to swap out as you have to access the headlight housing by getting behind the wheel-well covers, then remove the rubber weather seal cap protecting the HB3 once that is removed getting the light out is straight forward and there is a perfect place to stick the controller module up against the bottom/back of the cavity where the bulb is housed and then just make sure that your wires are all clear of the actual aluminum body/fan of the LED light as they do get hot and could melt wires if you have not ensured everything is clear of the actual LED light body - the controller module on the wire connector does not get hot so there is no concern with it melting the light housing where you stick it to the inside of the light housing with the supplied Double sided pads. I ran the HB3 Highbeams for 20 minutes straight with the rubber weather seals reinstalled to test heat dissipation being enclosed and they were very warm but not burning hot so not to concerned about anything with these lights and the new 6000k HB3 LED High Beams match the Low Beam Projector lights perfectly and are SO MUCH brighter than the OEM halogens - Very happy with the final look of the truck!