Ubiquiti UniFi 6 Lite Access Point | US Model | PoE Adapter not Included (U6-Lite-US)

Es MuY bueno y efectivo hace muy bien su función y alcanzaUn buen radio

Why did you pick this product vs others?:Integration with current router.

Wifi all over the place!!!

Unifi always works good

Integration of this AP into my home network was very straight-forward. Ubiquiti does require that you use their app or network appliance for configuration, as they do not provide a web interface like a SoHo router/AP would. However, the result of this decision is a more streamlined device with better speed and less overhead. For the adventurous and those that still really don't want to trust the app, you might instead choose to convert the AP to run OpenWRT. Be warned, however, that the result of doing so is an interface that is not as friendly as the Ubiquiti app, and performing the conversion would probably void your warranty as well.Installation: General installation is mostly a simple matter for someone with basic home handiwork skills. Drill the holes in the proper places, add the backing plate (if mounted to drop ceiling) or use the wall retainers** for drywall, mount the mounting plate, drill the cable hole and feed the cable^^, and settle the AP onto the mounting plate with a twist. This sounds easy and the AP even has markings for alignment onto the mounting plate. However, there are two gotchas I found with this kind of installation.**: The wall retainers and screws included with the mounting kit are, to put it simply, useless. The retainers don't have enough grip to properly hold the AP on a ceiling installation. All four retainers pulled right out on me during the installation, and I needed to replace the parts with something better to get a good, solid mount.^^: Seriously, make sure you have the space all around the mounting site and drill the hole for the cable AFTER you have the mount plate in place. The cable hole must be positioned very carefully or you'll have serious issues getting the unit to mount properly because the cable will be in the way. If the cable hole MUST be distant from the mounting bracket, there is a pop-out cable pass-through opening on the back of the AP.All that said and done, the signal distribution from the central, ceiling-mounted orientation is absolutely perfect. With all previous attempts I had using desktop or wall-mount consumer-grade APs, there were always dead zones that led to no amount of headaches. With the UniFi 6 Lite in place, there isn't a single dead zone. Coverage appears balanced and even across all spaces.End result: There's a clear reason why APs like this are used in corporate and enterprise environments. However, it doesn't require you be in an office to buy and deploy one. Even the Lite version does an excellent job in a basic home environment.

I work in an office where our state-provided Internet was garbage and we had the opportunity to add a regular ISP and our own hardware to the mix. I went with four (and growing) Ubiquiti APs and they have all worked -flawlessly- since install. Adopting them into our network was easy (it also helps greatly that we're using a Ubiquiti DreamMachine Pro SE to drive it all). The UniFi app is pleasant enough to use and has the features I was looking for in prosumer-grade network devices/software. Keeping track of what devices are on what AP, which are using a lot of data, securing the network, etc. is all very easy with these access points (and the UniFi app & UDM Pro SE.)I love the simplicity of having one CAT5/6 line running to each radio and that being all you need (assuming whatever it's connected to has 802.3af PoE and not passive PoE - I learned this the expensive way). Devices also may roam around basically anywhere in the office without losing connection. The included mounting hardware should also cover most situations and has also performed perfectly so far. I can also remotely administer them/the network (as long as the Internet connection feeding it all stays up.)The TL;DR of it is that these are devices you basically never have to babysit - they just work after the initial setup. I likely won't be at this agency for the rest of my career and I need something that will work spectacularly after I leave; these are it!

This was my first Ubiquiti product - So I wasn’t terribly familiar with the architecture / control types for it, but it does work well. You essentially have two options: You can use it as a standalone device, devoid of features like VLAN, Guest Network, and so on… Or you can pair it with the Unifi cloud controller. I started with Standalone, but quickly pivoted to Cloud, as I’d like to eventually segment my network into VLANs…If you’re going the cloud controller route, you can either use a hosted provider for a fee, or if you have the technical ability and appropriate equipment, you can run the cloud controller software on any of your machines. They do make a windows product, but I chose to do it on one of my Linux boxes.The AP has great coverage for my apartment. Network throughput is great, with most of my devices pulling 300-350 megabit down and up.