SEALIGHT9005/HB3 9006/HB4 LED Bulbs, Scoparc LED Combo Replacement Kit with 6500K Bright White, CSP Chips, Turbo Fan, Plug and Play, Pack of 4

Works great. Now i can see good.I have had installed for 2 weeks..I probably need to always turn my lights on in the day... (Because my daytime running lights only get like 9 volts)But it's worth it. They r sending me a decoder to attach.. but I don't know what that will do to "increase the volts" I don't mind always turning my headlights on if that is the case.My dad says the low voltage wont hurt them.. but I will just turn my switch 1 or 2 clicks to keep the full voltage ✔️Update: the decoders work good. Those DRLs r not dimmly lit now. They stay dark in the day now.

Excellent!! BRIGHTER THAN MOST PEOPLES FUTURE!!!

I was very nervous purchasing these due to the tight tolerances in 1999-2006 GMC Sierras and Chevrolet Silverados. Many of the aftermarket LED bulbs are simply a no-go as they require disassembly of the headlight adjustment brackets. I crossed my fingers when I opened the box that they would be about the same size as stock bulbs. To my astonishment and delight, both the low beam (9006) and high beam (9005) fit perfect. Easy install without a single curse word. I also added bulb grease, as I do with all headlight installs. Totally worth the extra 30 seconds it takes to add.The other benefit is that these bulbs come with wire connectors that are a few inches long, thus giving you more play than the factory bulb wires. This is a minor thing, but does allow you to get the headlight assembly in and out with less fuss.They are plenty bright and I'm hoping they last a long time.

My 06 Isuzu Ascender has no room behind the headlamp assembly for larger heat sinks that will protrude from the back of the headlamp into the engine compartment. The SEALIGHT S2 series are a perfect replacement for the existing lamps and allow the factory dust cover to be re-installed to protect the interior of the headlamp assembly from dust, water, or other contaminates that you do not want inside the lamp housing. I gave a slight ding in brightness as these were not quite as bright as the HID lamps I was using, but they do not need all the extra wiring or the capacitors that were used for HID either. Each lamp has a small tag to let you know whether it is a high or low beam, no extra tools other than a regular screwdriver was needed in my case, and unlike with other LED lamps I've purchased the connectors fit as they should and I did not have to play around with reversing leads to see if the LED lights would come on. The LED lamps appear to be well made from the lamp assembly to the cabling to the connector.

I’ve been looking for some type of decent LED bulbs, and these have definitely fulfilled that. They are very bright and give me great vision at night!