Autokcan 10H Nano Ceramic Coating for Cars, High Gloss Anti-Scratch SiO2 Ceramic Coating Car Kit Hydrophobic Paint Sealant Protection with Gloves Two Years Warranty

Very rarely do I classify do I classify a product as Amazing, unless it is truly amazing. After owning my Mercedes Benz CLA for over 5 years, I realized, there are products out there that would save me from having to wash and re-apply the protective wax coating layers. Obviously, you should be waxing your car, if you want your paint to last long and look shiny and new. Personally, I live in the dry desert, where it is very sandy. Wax doesn't last very long. A heavy load of wax will trap the dust/dirt and make the car look dirty. You'll notice that most wax applications are virtually useless. That's when I heard about the ceramic coating and this item. There aren't too many of these quality products available on the market and I was skeptical of this product, at first. If you are skeptical to see if it works, you should just try it out on the inner door jambs area, or an area underneath/side of the car. Applying this crystal coating is like placing a wax coating, but is much harder, more permanent. Best of all, itll look just like you bought the car. Ceramic coating is essentially an additional layer that gets applied on top of your paint...like a clear coat. This layer will eventually wear out like wax, but is much more durable to scratching from the sand and dirt in my area. This means that you're protecting the layers of paint from all the dirt and pollutants. Highly recommend this product. It was very easy for a first time DIYer (on this product), though I will say, I did bring a lot of experience and equipment. First thing you want to do is prepare your car for this nano application - thoroughly wash your car - for this, I decided to use a heavier soap that will remove more/all pollutants. If you want, you could use a little bit of dish soap to remove any preexisting wax, which is what I did. If you're crazy like me, you can clay your car and remove any micro particles, using a clay bar. This will definitely remove any wax and miniature particles. After drying the car with a microfiber towel, you're ready to apply the nano coat. This is the final step. Just like applying wax, you apply a couple drops at a time, in straight lines. Just make sure it looks fairly even and that the entire surface looks linear. The next step is just letting it sit for a minute before buffing. I do wish the product came with a spray bottle, but I can see a lot of the product going to waste, if they did that. They didn't mention anything about using a orbital buffer, but I decided to use that during this step. If you choose this, I would use something relatively soft. I didn't want to remove the coating, so gentle and slow movements should be fine. Let this thing dry for a couple days in the garage, where there is no dust, hopefully. After that is done, you can test to see if it repels water and dirt better than wax. If you want it to last longer, just apply wax on top, as you normally would. Amazing results - my 5 year old car looks like it was just bought from the dealership.

Simple et efficace !! Qualité vs prix très bon sens

Good product in this price range.

Cost to benefit ratio is great My wheels clean up very easily even at the automatic Carwash. I applied 2 coats about 45 minutes apart and let them dry for about a week. This product was easy to apply and very forgiving (this was my first time applying ceramic coat to anything) my wheels always look clean I’m very satisfied with what I got for the price

The product is amazing the car looks amazing and shine is fantastic I will buy again for my other car