Driving Fog Lights Lamps Replacement for 2011-13 Lexus GS350 HS250h LX570 RX350 RX450h Toyota 4Runner Avalon Camry Highlander Matrix Prius Rav4 With H11 12V 55W Halogen Bulbs ​(Clear Lens)

I purchased these for my 2013 Tacoma; the previous owner had (attempted) to install projector beam fog lights, and then replaced one side with a stock-looking light and it was just generally a mess. I wanted both fog lights to match, and look nice so I purchased this set. Price was good, quality is probably not the greatest, but they look fine. Before installing, I ran a bead of 3M weatherstrip adhesive/sealant around the seam where the bezel of the light meets the body of the housing, in an attempt to seal them up and prevent any fogging issues (time will tell if itll work). These werent made for 2nd Gen Tacomas, but they are very close. The tabs on the inside are off by like 1/4" thus preventing you from being able to slide them into the mount on the bumper. No big deal, to remedy this I just simply cut the inside bottom tab off of each light (tab facing toward the engine), and only used the top tab on the inside - the two outermost tabs where the screws go lined up fine and the screws fastened tightly. I wasn't sure at this point if the lights would move around at all, so I pushed on them and tried to shake them, and they were held in very tight, even with the missing lower tabs on the inside. They came with new bulbs in them, and the plugs lined up and connected easily. Overall, a decent fit with some quick modification, a good price, and both of my fog lights match again. If I have fogging issues, I'll probably try a different brand - ultimately I would love to purchase a nice set of LED fog lights for the truck, but these will work for now! EDIT 5/20/23: it's been just over two weeks now with these fog lights; I have the anytime fog light mod on my Tacoma so these have been running more than they usually would. I haven't had any issues with them fogging up - no moisture at all inside the housings, and they haven't had a single issue. 5 stars.

Fits as it should, looks good and have not had any issues. Been on my car for about a year. Easy to connect once you can get under the car.

Perfect fit, bright

One word wow, I converted these fog lights on my Mitsubishi Challenger front bumper and they look great, very bright as well.

Fit my 2015 Tacoma great, one gets a bit foggy on rainy days , but goes away as it warms up with bulb.

Great price they fit and much cheaper than the dealership. Easy ordering and received on time

Poorly manufactured- mirrored reflector inside of housing is not fixed (bounces around), screw holes do not line up. You can try to force fit, but lamp will not properly set into frame. The box they came in looked pretty cool, and product was packaged well- I will not waste my money or my time on this distributer or manufacturer again.

works well, for its price

Purchased in mid November 2023, one fogged up with moisture in approximately 4 months and the lamp just burnt out in the other one two weeks ago, not sure how to contact the company for warranty? Ad said last for 50,000 hours. John

Used on my 09 Venza, fits perfectly but the nob to adjust the light up and down broke in one use. So material is not that sturdy but fit is good.

The clips to install these lights are narrower than the stock lights and will not fit. Don’t buy these!!