150mm x 230mm Borosilicate Glass Plate/Bed w/Flat Polished Edge for Flashforge Creator & Makerbot Replicator 3D Printer

Got this for my Flash Forge Creator Pro 2. After figuring out the best position for some clips to keep it in place while keeping the out of the extruders way, and 3D printing a spacer to adjust for the z axis change, it works great!I haven’t even needed to add glue for bed adhesion. I either have to really work to remove the prints, or wait until the bed cools down to easily remove them. I’m beyond satisfied with my purchase.

buono come vetro ma molto delicato si rompe subito alla prima pressione applicata ho forato i quattro lati per la piastra della mia stampante 3d è andato tutto bene ma come ho stretto un pochino le viti di fissaggio un angolino si è rotto ho salvato gli altri fori con una minima stretta

I love this glass plate! It solved so many of the adhesion problems I was having with PLA and TPU. Not to mention removing the prints after the plate cools is so easy, they just fall off. I’ve been giving it a scrub with a damp cloth between every 3 prints and using a slow first layer and Presto! It just works.

Bought to replace the plastic build plate in flash forge dreamer. Works great, I use elmer glue sticks and they give enough adhesion to stop curling edges while allowing easy removal of parts. I have made some edge locators to allow quick removal but you could easily just use masking tape to hold it down. Remember to adjust for the extra thickness though.

Excusez-moi pour mon Francais !Tres bien emballee, parfait pour le Creator Pro.Problemes avec l'adhesion pour ABS.J'ai essayez un peu d'acetone avec les morceaux d'ABS - en elevent la piece j'ai aussi enleve les morceaux de verre - A eviter !Le meilleur solution - 20% colle de bois Pattex avec 80 % d'eau.Prechauffer et appliquer a 50 -60 'C - absolutement parfait.Pour ABS temp du lit 110 'C, extrudeur 235 'C, pas de ventilation.