Cuppini Chrome Rear Rack for Topcase;

Product didn’t fit my Vespa, HOWEVER, Mark At ScootsUSA did everything in his power to make it right, and helped me get the part I needed. Goof up on my end, but was unbelievable with his customer service! I appreciate them!

As other reviewers mentioned, these often come a bit rusty. Robot (Scooterwest) videos say the Cuppini chrome racks do show rust, BUT just a little wax or oil once a month and it is good as new. I used WD40, rubbed the rack and it looks good as new. It costs less than 1/2 the OEM rack, looks better (my opinion), and works well. The rear bracket cover does not fit for the aesthetics. If you are handy, you can cut the OEM cover down a bit and it will work but only if you aren't going to put the OEM hand rail back on.The fit is close enough but not perfect. Best fit is to put in place, then insert the rear screws but not tight. Then the mounts under the pet carrier. The reason is because the front ones are more flexible while the rear is pretty firm and can't adjust if the holes don't line up.Lastly, the rail is smaller in diameter than the OEM and is closer to the seat. If you have a light colored seat, grab the bottom rail for putting on stand or you'll keep getting the seat little wear marks from the oils on your hand rubbing the seat.Hope this helps someone and have a scooterful day!!!

The rack rusted instantly. The seller it’s because I live in California. The fourth picture is the rack from Vespa, which was on for 2 years- no rust. A very cheap product. The rust also damaged my vespa

Very nice flat rack. Dose require a little tugging and pulling to get fitted but, no more than others I have installed on different bikes over the years. I didn’t want the bubble look of a top case or a folding rack and the Cuppinni fit the ticket. I would recommend this product.

Fits perfectly and looks beautiful on my 2018 Vespa Primavera.

Does not fit Vespa scooters.