KUNTEC 19 PCS Universal Bearing Press Kit for Front Wheel Drive Bearing Puller Set,Hub Removal Installation Tool Kit,Wheel Bearing Puller Tool Set

Good Built tool makes a job of changing wheel bearings

I used this set to press out/in a wheel bearing on a 2009 Corolla, and it did the job without issue, and had the appropriate sized pieces to get the job done. There are sets out there that cost a bit more and have a few more pieces, and I had a bit of buyer's remorse/trepidation that I should have bought the larger kit to ensure I had the sizes I needed, but it all worked out fine.

This product is well worth the purchase. It pulled the front wheel bearings on my 2002 VW Passat so effortlessly. I used my impact to remove and install my bearings with this tool in an hour. Strongly recommend

This set was able to install a 2003-2007 toyota camry Front wheel bearing. You will need a Slide hammer to remove the hub assembly if still on the car. I have a press and removed from car and wanted to try it out. Has the correct sizes to press in the New wheel Bearing. Make sure you lube up the Thread rod on the long bolt /washer and I didnt use a impact gun to avoid any damage to the threads. take your time-make sure bearing is square to press in and Some years one side has the wheel bear there is magnet side for the ABS sensor . So check 2x before you install the WB for correct position, You would hate to do a REDO... good luck

I haven’t used them yet, but it looks like all the pieces are there and I think it’s going to be able to do the job when I get started next week

If the hub is pressed through the bearing this does not come with the tool necessary to take the hub out

I have a Honda Element and the front wheel bearings are pressed in. Since I didn't have a press I was putting off replacing the bad bearings on the Honda. This kit worked like a charm. It's easy to use and well made. I am very happy with my purchase.

worked great changing the front wheel bearings on my 89 MKII jetta. used with air impact, after greasing all the threads with EP/wheel bearing grease. can't beat the price compared to other "name brand" kits. I won't be using it every day so I expect it will last me a long time. a good addition to my pulling and pressing tools.