Hella 011225831 Black 12V Bx Trumpet Horn Kit(Universal Fit)

Was not expecting this to be good! 100% recommend.The tone is somewhat similar to the higher tier brands in the market for a fraction of the price.Had no issues on my installation; unless you're upgrading from a single to dual horn setup you might need to add in a relay through the entire horn circuitBuild quality is decent, they're somewhat a higher profile dimension but the included brackets provide decent placement.

Other cars scared if they heard it loved it

Quality sound with reasonable price.Highly recommended.Ya and it is really loud.

Installed on 2017 Pajero and it is a great improvement over stock horns. Sounds strong. Better if you use a relay.

Recommended

The horn is loud and clear and yet not so noisy to disturb others.It replaced the stupid stock horn on my 4x4 to give it the attention it deserves.

Low sound

Distinguished strong beautiful sound. It sounds so nice, that makes you honk more often 😁

Decided it was time for some new honkers for my 1998 4runner since my oem ones were dinkie and sounding really funny. One of them went bad and gives off a strange sound. Put these on an they are an awesome upgrade. Horns are a much louder & have a deeper tone and demand attention when used! Thankfully toyota is toyota and makes it easy and has been using the same single pin horn connector forever so they plug right into my factory horn wires. For you 3rd gen 4runner and probably 1st gen taco people out there the horns in the toyota kit will fit but you will have to do some slight modifications to one of the horn brackets. but it's very easy. First thing you'll have to do is adjust the connector on the horn. They come out the box at the wrong angle for our trucks and the horn wire won't reach it to put in. They rotate though so just push down hard on the connector to make it spin around. It spins but it's very stiff so you have to push hard, don't be afraid to. First photo is after I rotated them. Secondly, at least for my 4runner the passenger side horn didn't fit because of the ac line right next to it. All I had to do was drill a hole higher up on the bracket to clear it. roughly 31mm from center of the old hole to the center of the new hole. In the pictures it looks like it's touching the ac line but I promise you it's not. Its about a 12mm gap in between it and the horn so it's plenty of space. You will also have to use a regular box end wrench on the passenger bolt now since the horn is moved up and blocks socket access from the front. Overall really liking these new horns so far, they are good value and definitely work well and they fit great even though they are larger than the ones I had before. They aren't touching on any part of the grill or other pieces around it either. Easy good upgrade!

Cambié la bocina original de mi 2020 Rav4 por este set. Es muy buen sonido, aunque ambas bocinas suenan muy fuerte, elegí poner sólo una y aun así el cambio es muy bueno.

I recently purchased this to upgrade my stock car horn, it was easy installation as i didn't need extra wiring. So far remains durable despite rain and now snow. For the safety aspect, it makes a very good sound, not too loud but enough to indicate presence and to alert vehicles and pedestrians.

Passt perfekt bei Toyota Rav4 2022.Sound nun nicht mehr meep meep, sondern HOOOOONK ;-)

Hight quality sound best for that price... I brought it for 1380 rs it is worth every penny for that price... Very very similar to creta OEM horns... That creta horns cost around 3k to 4k... Go for this blindly... 👌👌👌👌