RHINO Smart Solutions Respirator Mask RH-M101 A1P2 Filters | Dust Mask for Sanding, Gas Mask, Chemicals, Spray Paint Face Masks and Organic Vapors with Safety Goggles | DIY, Building Work or Asbestos

I got this for 3d printing at first but then I read about the fumes getting in via the eyes so upgraded to a full face mask. Now use this for airbrushing and rattle can priming, post processing and sanding miniatures and larger prints. The goggles fit over my glasses fairly well and mask is fairly comfortable but the hard plastic clips sometimes dig into my face a bit and I personally am not a fan of the big round plastic bit at the back. But the seal is good and it can be adjusted well, the filters are decent and can be swapped easily for different types and levels of protection. Get this if you cannot afford a full face mask. Resin printing without a mask is possibly one of the dumbest things anyone can do, get a mask and this one won't break the bank and might prevent your suffering in the future if you use it and maintain it as per the manufacturer instructions. Any tool is only as good as the tool using it, so don't be a tool and us it correctly. Now buy this or any alternative that filters VOCs, no those crappy charcoal filters in the machine will not do anything to protect your health, there like the filters on cigarettes, there just there to make stupid people feel safe.

Excellent product and delivered so fast

I have tried other mask, but because I wear glasses I’ve yet to find any that are comfortable, or that can keep out the dust, that was until I got these. Have to admit that I did have a problem with my usual glasses as they didn’t fit inside the goggles because of the frames, so I changed them for my other pair with smaller frames, and that worked. Been using mask and goggles for spray painting. Keeps the paint fumes out, and Breathing was okay. Glasses didn’t mist up or anything, so yes I’m pretty pleased so far. If you wear glasses with large frames I would say due to the goggles that come with the mask, I would not recommend, BUT if you have smaller frames then yes I would recommend, I don’t think you will be disappointed.

Quick delivery Very please with this product it is well made I'm wearing it for when painting and unable to smell the paint which is great so must be doing what it is meant to do.

Used this when cutting insulation boards and it worked really well. For a mask like this it’s comfortable to wear and the addition of glasses and gloves is a an added bonus. Ended up using on later woodworking projects too.

This is a great respirator that fits the face and the best bit is it does not smell of rubber or plastics from the manufacturing. breathing is easy and does not take effort to inhale I find this a great product. The goggles which came with it fit well and the best bit is they do not steam up when wearing them

This facemask seems to do a great job, and I feel really confident that I'm not breathing in dust particles. And the seal is so good that the goggles don't steam up from any escaping breath. I agree with the other reviews saying that the straps and their connections are really weak. The manufacturers/suppliers seem to realise this and accept it, because spare plastic strap connections were included in the pack! Having said that, once I do manage to wrestle the thing onto my head without straps pinging open, the face seal is excellent on my face, and it does a great job. I use mine when I'm sanding wood, and at the end of a sanding session I am usually covered in wood dust, and so it's an extremely unhealthy environment to breathe in. Until now I've just been using a standard dust mask, but because I've been doing more and more sanding I thought I would try a 'proper' facemask instead. Apart from the feeble straps, the other downsides are that the instructions for assembly are very poor (but it doesn't really matter because it's fairly obvious what goes where), and that when I use the mask for more than a few minutes it gets lots of condensation on the inside of the mouth/nosepiece. On the whole though, I'm really pleased I bought it as a first experience of this type of mask. I probably wouldn't buy this same model again because I'll go for a more robust and more expensive one next time, but this one does exactly what I need it to do at the moment. If you are in the same position as I was and urgently need to upgrade from a normal dust mask (or your current one has just broken) then I would recommend this one, but if you're replacing a working mask or you've got time to shop around then maybe invest a bit more money and go for a sturdier model.

From the comfort of the nose and mouth piece to the adjustable straps. This respirator mask and goggle set stands out from the rest. The replaceable filters, the breathability are all superb. This is a really good value and durable set that can easily be used many times.

Good

parfait , facile a assembler , plusieurs filtres vendus avec J ai peint au pistolet en piéce close,avec beaucoup de vapeur,excellente filtration+++

Die Maske ist wirklich gut! Atmen ist absolut kein Problem (im Gegensatz zur ach so „sinnvollen“ und „rettenden“ FFP2-Maske eine Leichtigkeit!). Der Zusammenbau ist kinderleicht und selbsterklärend. Beim richtigen Aufsetzen der Maske dichtet sie voll ab. Habe absolut nichts an Gerüchen der Spraydose wahrgenommen. Ich kann diese Maske wirklich empfehlen! Kleiner Tipp: nach dem Ausatmen ggf. 1 Sek. mit dem Einatmen warten, da sich erst das Auslassventil vorne schließt. Atmet man zu schnell saugt man dadurch etwas ungefilterte Luft an. Das ist aber kein qualitativer Mangel der Maske, sondern einfach logisch. Wenn man hinter der Maske atmet wie ein Gestörter, dann hat das Ventil doch keine Zeit sich zu schließen. Sobald man keine Luft mehr ausatmet (Überdruck) schließt das Ventil und man kann sanft durch die Filter einatmen (Unterdruck). Die Zugbänder erfüllen übrigens auch ihre Aufgabe. Wer hier schreibt, dass sie reissen oder sich einschneiden, der hat es einfach falsch gemacht. Klar spürt man die Bänder, vor allem wenn man schwitzt, aber auch das ist doch alles normal… Für mich funktioniert es und ich bin mit der Maske rundum zufrieden!!

perfetta per chi come me fa lavoretti con legno o muratura ed è allergico alla polvere, fatta molto bene si respira senza problemi e anche la maschera è comoda, si vede bene e non filtra la polvere

⭐️⭐️⭐️⭐️⭐️ 100/100 – Utmärkt produkt! RHINO Smart Solutions dammskydd överträffade verkligen mina förväntningar. Masken sitter bekvämt även under längre arbetspass, glasögonen skyddar effektivt mot damm och partiklar utan att imma igen, och handskarna har bra grepp och hållbarhet. Allt känns genomtänkt och av hög kvalitet. Perfekt för renoveringsjobb, slipning eller byggprojekt. Rekommenderas starkt!