Rust-Oleum207005-4PK Marine Topside Paint, Battleship Gray, 32 Fl Oz (Pack of 4)

I used this stiff to paint the ‘hello 1960’s’ wall tiles on my bathroom. Underneath I primed with Stix primer which seems to really adhere to the tiles. Once it was dry I could not scratch it off with a fingernail so I assume it is a good base for this paint. Originally, I had issues with cratering when applying this paint and I was a bit hesitant to use it. But when I put on the first coat on a warm/hot, muggy day, no issues with a foam roller. One coat was not sufficient, although some folks might find it acceptable. For coat no. 2 I first scuffed the overnight dry paint with 320 paper, just enough to remove any lumps, bumps etc. Then I used a Mohair roller cover. Being bigger(regular diameter but 4” wide) it held a lot more paint and worked great. At first it took a few strokes to saturate the cover and there were tons of bubbles, but they all went away. This paint job had 80deg humid weather which I think was a plus. Slowed the drying process and allowed the paint to level nicely. Not glass like which might be attainable, but a very subtle texture which looks like its the way the tiles were made. And it is high gloss. We’ll see how it holds up over time but it looks great and a heck of a lot cheaper than a tile job. One caution. The stuff got old school VOC big time. I would not use it when you might have to keep a house closed up. I was thinking of spraying but I figured the masking, need for a respirator etc was not worth the effort. Overall, nice paint. It seems durable and we’ll see how ot works in a bathroom. I also painted the ceramic towel bar fixtures. They look like white smooth ceramic which I think was the result of brushing. To cut in edges I used the throw away chip brushes which worked fine. Not worth trying to clean an expensive brush with this paint

I recently used Rust-Oleum Marine Topside Paint in Navy Blue, and I am thoroughly impressed.Quality and FinishThe paint quality is exceptional. It provides a smooth, glossy finish that looks professional and high-end. The navy blue color is rich and vibrant, giving a sleek and polished appearance to the surface.ApplicationApplying the paint was straightforward and hassle-free. It goes on evenly and dries relatively quickly, allowing for a seamless painting process. The consistency is perfect, neither too thick nor too thin, making it easy to work with.DurabilityThis paint is designed for marine environments, and it shows. It holds up well against the elements, providing excellent resistance to water, UV rays, and general wear and tear. We used this for our trailer and it looks fantastic.Overall ExperienceOverall, Rust-Oleum Marine Topside Paint in Navy Blue is a great product. It offers excellent quality, easy application, and impressive durability. Highly recommended.

I used to paint an old slop sink in the laundry room. Since the basin is nice and deep i didnt want to replace it if i could make it look good. This product did the job and looks great going on 3 years. I painted it inside and out and it covered in 2 coats. I also used on metal railing outside and inside wood railing banister post. All still look great!

I used one can of this to coat my stall shower with two seats and our 6 foot long, two sink vanity top. I covered them each twice and that was pretty much that! So I’d say the coverage was pretty good! As far as painting a sink…. Well I am not sure how this is done without some type of line or texture being left behind. It’s not horrible but it looks painted. Part of that is this being a satin finish. I am not 100% sold on this for sinks, but the shower is holding up pretty well so far a month later. I did buy the grit to add into the bottom of the shower and it’s like a very light pumice. There will be no slipping in that bad boy! I think the only big downside for me and that it does seem to stain. Whether is a splat or two of hair dye or make up etc, I have 2-3 stains I haven’t had much luck getting out. I wore a respirator to avoid the smell that everyone talks about. My husband said it wasn’t bad when he popped in to check out my work but I’m not chancing these brain cells!

Used it on Formica counter top. Sanded it down until there was no glossy finish left. Wait 24 hours between each coat. First coat looked bad, 3rd coat looked perfect. 3 days to cure, 5 days before it wasn’t tacky to the touch. Use a high density foam roller and foam brushes. No primer needed.

This is very high quality paint. It lays down and flattens out very nicely. This is the paint I use when I want something to look really nice. Good enough to show off to my dad. For best results plan to use 2 coats.I gently sand with 220 between coats.The finished surface seems to be tough and water resistant. It really is boat quality paint.

I have a fiberglass roof on my 2005 Circle J Horse trailer. After heavy research this was the best suggestion for adding a new durable coat to the top. It turned out fantastic. UV protected, texture, color, & water repellent.

Used this product to refinish a bathtub. Clean and sand tub. Apply a coat. Slow drying(left it dry overnight) lightly sanded with 220 paper then applied second coat. It looks great! A half quart did both coats. Fumes were not bad. A little like the old oil based paint, but didn't smell as strong. Cleaned up easily with mineral spirits

Was able to do 1 coat over same colour on 2 canoes with 1litre and still have some left over for touchups.Havent put in the water yet so not sure about durability.

Really good coverage and looks great .

Used it in battleship gray to paint a patio table that has seen better days. Looks new now! Very happy with the finish. Put 2 coats on (sanding lightly in between coats). It took much longer to dry than the can said. Stayed sticky for a week maybe, for the first coat? Less for the second coat. Not sure if it’s because of the humidity. Impressed with this product and would definitely consider using it for other outdoor applications and trying other colours.

I have used Rustoleum "tub and Tile" MANY times on 3 different shower/tub enclosures to DIY and fix them up. It is a very messy thin and toxic smelling product. This is NOT any of those things. It is "thicker" so it covers better. It flows together better and DOES NOT RUN! Please take my advice and try this you will not be disappointed. I wish it was available in Canada but it is not, we are fortunate Amazon carries it for us. I am always wondering why we have such terrible products we must use in Canada as the good stuff is not made available to us. This is much easier to use as well, a beginner can easily refinish their tub/shower with one can, and giving it 2 coats as it goes very far. I see many people speak about the smell, well it smells much less then the Tub and tile product. That product smells very toxic this does not. The smell it does have disapates with in 1 hour. Good luck with your project and try this "Top side" out it will make you proud!

Did not like this product and removed the paint as it doesn't cover very well. May be good to spray I don't know.