SafeAMP Wire Harness Connector for Fisher-Price® Power Wheels® 12-Volt SLA Battery

Got a free powerwheels with no battery, Purchased this to use some old SLA batteries from a UPS in it, and it works great. Might also see if I can get some battery protection units and set up a LIPO pack instead so I can use a lithium charger system instead of the old SLA charger. Highly recommend so you don't have to buy the factory batteries.

Battery died on my son’s ride in atv. I bought a much cheaper replacement battery with same specs, but needed this to make it fit and use with the charger. Happy with this.

Was real easy to put on.

Allows you to purchase a better battery at a lower cost and run the Power Wheels car for kids.

I bought this because of the videos I watched on installing a larger battery (with more capacity) for the Power Wheels Dune Racer for my girls. I bought 3 things from Amazon to make this work - this product, the battery (Expert Power EXP12200), and a charger. The Dune Racer has a cavity in the very front (and a little hood over it) where the factory battery is held in when it ships. This adapter lets you keep the stock Power Wheels harness (so you can still use with the stock battery) AND let you add a bigger battery. When the bigger battery runs out of juice, if I want, I can still plug in the old one. I went to a local hardware store to get 12ga wire, terminals, and wire holders to run from the back of the car (where the adapter ends) to the front of the car (where the battery is stored). I then used self-tapping screws to mount wire holders into the plastic.The first pic is the adapter plugged into the charger. I just charge the battery in the car, as the battery is heavy and the wiring is screwed to the car. The last 2 pics are the battery housed in the front of the car. The middle pics are just the routing of wire from battery to adapter. This is not pretty/professional work - I did this in 30 minutes in 20 degree weather and my hands were numb, but you get the idea of how it works. The new battery changed drive time from 15-20 minutes to right at an hour.If you decide to do this, we were in for around $80 for everything. I need to clean up the wiring a bit, but it works great and my kids had a blast. The kids wore out before the car did ;)

Converted an old battery charger into an adapter to run my kids' Power Wheels, was quick and easy with this harness kit.

Great product

We have a green 12v Power Wheels Dune Racer. The original battery wasn't working anymore (probably our fault because it wasn't getting regularly charged), so I need to replace it, but I didn't want to spend $60 on a new battery. You can actually use a generic 12v battery (there are different capacities - the original PW battery is 9.5ah). The trick is finding a way to connect the battery to the car and to the charger. You could break apart the top of the PW battery and pull out the connectors and attach them to your new battery, but that's a little bit of labor, and I think it may require soldering. Alternatively, you can buy this connector. One end connects to the car and charger, and the other end connects to the battery. Batteries have leads, one black and one red. You simply push the red wire onto the red lead and the black wire onto the black lead. No problem at all.However, I did encounter one issue with my connector. When I plugged the battery into the car, it worked fine. But when I plugged it into my charger (I use this one: https://www.amazon.com/Schumacher-CR-1-Universal-Battery-Charger/dp/B005F1YJ3I/ref=pd_sim_21_7?_encoding=UTF8&pd_rd_i=B005F1YJ3I&pd_rd_r=95A7NWXWCDQHDVV2HHP7&pd_rd_w=BhDHF&pd_rd_wg=W0owO&psc=1&refRID=95A7NWXWCDQHDVV2HHP7, which is vastly superior to the one that comes with the car), the charging indicator light did not show that the battery was charging. This connector, and the original PW battery, connect to the charger and to the car in separate ways. The inside portion of this connector, where charging cable plugs in, has two metal leads. The leads on mine were too far apart, so the charger wasn't able to make proper contact. After pulling out the leads a little (while this connector was not connected to anything), I plugged the charging cable back in, and it worked fine. I used this battery: https://www.amazon.com/ExpertPower-EXP12120-Volt-Rechargeable-battery/dp/B00A82A2ZS/ref=pd_sim_21_1?_encoding=UTF8&pd_rd_i=B00A82A2ZS&pd_rd_r=95A7NWXWCDQHDVV2HHP7&pd_rd_w=BhDHF&pd_rd_wg=W0owO&psc=1&refRID=95A7NWXWCDQHDVV2HHP7.

The battery terminal connectors fit well, the Power Wheels side fits, but does not latch as expected.The adapter is still useful, but it would have been nice to get the locking action the connector is built for.The product quality seems good otherwise and is still useful.

This works! It has F1 terminals and a fuse block.

Works great and you can add a longer ride time battery for the power wheels and also use the supplied charger

Great product! Fit perfectly, lost a star due to cheap fuses. Blew 2 first time out. If you buy this go buy some good 40A fuses.

We had a peg perego battery that we wanted to use for a power wheels. This didn't work without some re-figuring by my handy husband, none of which I can explain on here. So yes, in a pinch it does work but could have been better.