Wall ControlPegboard Organizer 4 ft. Metal Pegboard Standard Tool Storage Kit with Black Toolboard and Blue Accessories

I installed in in only about 30minutes. 3 panels that are total 48" x 36". Very sturdy and comes with plenty of pegs/mounts. I also went to Home Depot and got more pegs and all varieties fit. You can see I even have my leaf blower hanging here. This is simply amazing and was exactly want I needed especially for a man that loves everything organized and tidy.

Excellent production the possibilities are endless with the ability to add more panels and hooks/shelves. We’re going to be buying more being able to buy extra hooks separately makes the panels customizable for every need.

I did a lot of research before buying these, and they fully lived up to what I was hoping to get from them. The panels were easy to install once I got the wall prepped. I was putting them on bare studs that were 12" on center (the mounting holes are meant for 16" centers), so I just mounted some horizontal 2x4s on the studs at the right heights for the upper and lower screws and then put the panels on the 2x4s. I didn't even bother with the middle row of screws and they still feel very solid. The assortment of hangers in the kit is good, and if fully used will use most of the space on the 3 panels. I used them for a small basement workshop, but will be ordering a lot more when I fully redo my garage, although for those will likely buy the panels alone and hooks separately as needed to save some money and improve customization. Highly recommend these.One note is that you really should take time to adjust the tabs on the hooks that have them. 10-15 sec of work per hook took them from feeling loose and trying to fall out when I used them to completely solid and going nowhere. Those tabs are there for a reason and are rarely perfect from the factory. Just grip the body of the hook with one set of pliers and bend the tabs back with another.

I ordered the main kit + 2 extra boards. I opened the addition first, each board was wrapped seperate, and looked awesome.The main kit though, Straight out of the box I noticed the bag the boards came in wasn't sealed. The paper wrapping for the parts was scrunched up and to the side instead of wrapped around the parts. Inspecting the boards that came with the main kit, they were clearly used before. Scratched, bent, dinged up.The parts I ordered were WAY over painted to the point where half of them would insert for the first angle part on the top, but the bottom. Notch was nearly solid, so I couldn't seat alot of the clips on the bottom part.This system should be amazing and efficient but very poor quality control. After a lot of additional work I was able to get all the pegs on the board, but the pieces they give you aren't optimal for much. Cresent wrenches aren't being hung with the default kit the pegs are so over painted I couldn't get anything smaller than a half 8nch to go over the pegs.Using nailed. I probed, And started at the center of a Stud for mounting. The edges are too thick, I couldn't even get both sides of one piece to fall on a Stud. It was always one side in a stud, one side anchored.The anchors they send are flimsy, I wouldn't hang a picture using them. I switched to 90 pound anchors. For the screws them self they're horrible quality, I stripped out nearly every one of the first panels stress using a hand held cordless screw driver, not even a drill. I threw the screws out and used my own high strength screws.Over all if I had the time to take it all back down I'd send it back. Very disapointined.

Nice quality pegboard! I ordered a total of 12 panels (some in kits with peg accessories, some just as panels alone directly from Wall Control). My first 3 panel set came from Amazon in perfect condition. The second 3 panel sets from Amazon must have been dropped on its corner because every one corner of every panel was bent (see photo). I had very limited time set a side to complete my project so I had to use the damaged panels. These were not inexpensive so I was none too happy about the damage. Also, you might want to be aware that if you plan to group vertical panels with horizontal panels, for some reason the manufacturer decided to not align the slots and holes in the verticals panels consistently with the horizontal panels...There is also a photo to better explain what I mean. The slots from the vertical panels become holes in the horizontal panels...Little things like that really bug me but does not affect the quality unless you plan to hang something between the panels...it won't work.As far as installation goes, I received all necessary parts and screws with my panels (missing parts seem to be the norm these days..but happily not with this product). Installation was simple and straightforward . I wish I had more wall space so I could use more of the product!