Gates K060473 Micro-V Serpentine Drive Belt

Will buy again

works great

I got this belt for a 2019 Honda Odyssey and I can guarantee that it's the same size as the original and works great. It wasn't too bad to replace because I didn't have to move any items like covers or coolant reservoir out of the way. You do need a 17mm or 11/16" socket. I prefer to use a 12 point socket, that way the socket can be adjusted at a better angle. I also used a serpentine belt tool with a 3/8" drive. A longer socket also works better in this case. I had a short socket but used a 1-1/2" extension with it. This allowed me to clear the coolant line when adjusting the tensioner. I'd recommend removing the belt from the alternator pulley and also installing it on that pulley last. That way you can make sure the belt is on every pulley before adjusting the tensioner on it. I know the listing said it was made in Mexico, but the belt looked good, no visible stitching like the original belt that came with the car. I'm assuming it was made with an overlap which I think is a better construction. Overall, I'm good with it.

Needed to support an extra alternator on my RV

Gates makes good belts. Fit application correctly and priced reasonably.