Epoxy Resin 1 Gallon Kit - Crystal Clear Epoxy Resin Kit for Art, Craft, Coasters, Jewelry Making, & Tabletop Coatings, Excellent Resin for Beginners and Top Notch Pros

Llego a tiempo, muy bien embalado, perfecto precio y producto

As a Christmas present for my wife I offered to apply epoxy countertops. She was doubtful but likes the garage floor I applied. The reviews are all over the place for this product but this review is for countertops over formica. This brown marble exotic pour is a thick 5 oz per square ft followed by a 3 oz per square ft clear coat with this Epoxy store Clear resin. The final finish is over 1/4 inch deep and is flawless. When you watch YouTube videos be warned you can pour a counter in 10 0r 15 minutes but it will take you many hours to prep the surface, in my case 12-16 hours to sand and prime 40 sq ft. You will only have one chance to get it right and it is an art but if I can succeed anyone can.First clean, clean, and sand and then sand again. one grease spot will leave uncovered fish eyes. Use correct fillers, sealers and primers. When mixing for showroom countertops mix the epoxy well. I used a drill attachment for 3 minutes and then poured mixed epoxy into separate color cups and mixed each cup. I then poured the mixed cups into a separate container to ensure material was completely mixed. I poured out in separate batches of 8 square feet and helped the epoxy flow with a heat gun, torch, and hair dryer to obtain the brown marble effects and had almost an hour working time at 70 degrees. After 24 hours I poured anther 1/8 in clear coat and was happy with result. No soft spots no fish eyes no problems. I prepped correctly and cleanup was a breeze. Saved thousands doing this for the holidays... Merry Christmas!

Worked great for our bar.

The media could not be loaded. Update: I contacted the sell and they were very nice and very easy to work with. They are supposed to be sending me a replacement to try. Amazing customer service!I have had trouble with this epoxy every since I bought it. I contacted the sell to see if they can tell me what I’m doing wrong or if it’s just a bad batch. It will not stick to my cups and I know for a fact it’s not my cup bc I can use a different brand epoxy and it works just fine. It’s got an over load of bubble that are super tiny and will not pop with a heat gun. The video above is what I mean by not sticking to the cup. I’m not one to leave bad reviews but I paid a lot of money for this epoxy hoping it would work good and it doesn’t. I’m not very happy. I would send it back but I’ve already used a bunch out of it bc I was giving it the benefit of doubt and kept trying different things to get it to work right but I’ve tried everything and it still doesn’t work. It’s caused me more headache than good!

Actually that is probably not true about the drinking part but I really don't need a bar table. But wait! you can use this for sooo much more!I am a wood worker and use Resin for filling Gaps in turnings and did make one of those river tables once. I usually go with whatever is on sale and they work fine. I will however look to buy this brand again.It seems to mix better than the other brands I have used and is thinner and stays open longer. These things are very helpful to me as it flows into the minute cracks well. The thinner viscosity and the longer set time allows the bubble to dissipate much better than the others I have used. The fact that is stays open longer does not seem to translate to drying time and it is rock hard within 24 hr and ready for turning on the lathe. (this is in a cold basement that can be 60 degrees or below) I have had others take twice that long and one brand that would chip when I turned it. These things all could have been a result of my error or perhaps the drinking but I will buy this brand again.It should be noted that when it arrived it looked like a bear had gotten a hold of the package (UPS) but the bottles were taped shut and inside a plastic bag so there was no leaking.

Very low viscosity while pouring (which is a good thing, as it gets into every crack and bubbles float right out) and hardens crystal clear.I've had zero problems with this epoxy.

I have ordered this product over 18 times . Never once had an issue on the company, however one time when I got my package it had leaked out over the entire plastic packaging inside box, I notified them and they ship me out another one. I totally recommend this

LEAKED!! I have no idea how, but the bottle of my part B of my order has a nice size hole in it. I ordered this a while ago, and it sat for a long time. I went to get it today and noticed the box had wet spots all over the bottom. I opened the box to find the resin leaked all over the box. How it managed to get out of the bag enclosing the bottles is beyond me. Made a huge mess and now I get to clean it up. Not happy. It was not the seal on the top, it is a hole in the bottle.