WoStick10 Sheets Upgrade 2.5mm Thicker Peel and Stick on Tiles 3D Self Adhesive Wall Tiles for Kitchen Backsplash(30cm x 30cm)

WoStick 10-Sheets Marble Stone Stick on TilesYou certainly cannot beat a tiled surface in a bathroom, kitchen or shower room. The only problem is that it can become quite expensive, along with being messy and certainly time consuming. Trimming those odd tiles to fit round objects on the wall can be quite difficult unless you are skilled in that department. Here we have a solution that is much cheaper and certainly easier to apply.There are 10 tile sections supplied in the box, along with detailed instruction giving information on suitable surfaces and how to apply the tiles. Each tile measures 30 cm in height, total width is also 30 cm but after allowing for each section to slot into each other it works out at 23 cm width. So there are enough in this pack to cover a 30 x 2,300 cm section. Two or three packs should be enough to place a line of tiles along the length of a worktop in an average kitchen.Fixing the tiles is simple, providing a few basic rules are followed. Measuring and marking a clear guide line is essential to ensure there are no gaps between the sheets. The wall surface must also be clean and dry, free from any grease, bumps or anything else that may spoil the finish. The panels have a protective sheet of plastic on the front which should be removed after fitting. On the rear of each panel is a removable film which when removed reveals a super sticky surface. It's best to trim any panel to size before removing the rear film, when applying just pull a small amount of film off, then ensure the panel is sitting square before fixing. Any further sections can be slotted into the existing panel to perform an invisible join. If care is taken the joint can be virtually invisible, the secret is to not try to stick too big a section at a time, just peel back the film as you go.I have used a similar product to this in the past, when applied correctly the wall does look as if it holds real tiles. Be warned, if a mistake is made, you cannot peel off the panel to reposition it, when it's stuck, it's stuck. So take care when fitting these as any ill fitting panels will need to be removed which is not easy. Take your time and you should achieve excellent results.The pattern on these panels give the impression that long slender wall tiles have been used. The colours are white along with various shades of light grey. I must admit, they do look like real tiles and certainly are a cheaper and easier way of smartening up a kitchen or bathroom.CONTENTS:10 x Sheets1 x Instruction CardThank you for reading my review, I hope you have found it helpful.

I am absolutely delighted with these self adhesive marbal stone effect wall tiles that are 2.5mm thick and look very realistic. These are not ordinary printed tile stickers you see in DIY shops. These are proper thick tiles with elegant design that feels like real tiles even when you touch them. They are 3D shapes with raised surfaces.These were 10 tiles in the pack and I have used 9 of them to create a backsplash for my kitchen display cabinet that was just installed on a painted wall surface. It now looks neat, elegant and beautiful.Adhesive is very strong so make sure you plan before you peel and stick it on. Like they say measure twice and cut once. There is a set pattern to follow so make sure you have a level line. A bit of DIY experience and common sense and you can real create a gorgeous splashback in your kitchen, bathroom etc. It is very easy to just peel and stick the tiles without any mess. It really has transformed the wall. Tiles are water resistant and will protect your surface. They are easy to clean with just a damp cloth. I managed to installed all in couple of hours.Wife is absolutely loving it and I am proud of my DIY job. I loved this product and definitely recommend it for home transformation. 5 🌟

This pack of 10 sheets of stick on 3D wall tile stickers look very realistic. They are well made and have a nice slight rubbery tile like surface texture and a very good and adhesive sticky back. The tiles helped me to decorate my downstairs bay window area with part tile effect on the wall. As long as you line it straight, you can't go wrong and make sure you trim the sticking out bits if you are starting from a straight left edge.I peel the top half of the rear backing sheet off, line up the left and bottom sides before smoothing the sticky sheet downwards as I peel away the backing sheet.I am very happy with the results and effects of the fake tiles effects and one of my friends thought how did I do so much tiling overnight and so tidy? He came round the next evening and was amazed at the looks.I then broke it to him that they are stick on fake 3D tiles. haha.. I'm impressed with this product and they offer a generous 10 sheet pack unlike others who offer only 4 or 5 sheets.This product is great value for money and you can cover a decent amount of space with 10 sheets.

This is a set of marble effect tile sheets. They give a tiled effect without the mess or work of retiling a wall.I have used these against a kitchen worktop as a splashback type effect. The sheets are easy to place and do interlock with each other making it easy to position them alongside each other.I have used these on a painted wall, and I am very pleased with how well they have adhered. After them being up for a couple of days I did give them a press and could not find any movement in them so I know they are stuck well.I do like this effect, it is simple and best of all if I decide to change the decor I can easily replace them.I do like this simple but very effective method of tiling and I would happily recommend these adhesive interlocking sheets.

I really wanted a cheap alternative to redecorate my kitchen. When I seen these tiles I ordered a pack to see what they looked like in person. I love the marble effect, I think it would really brighten up a kitchen. HOWEVER, the pattern has no real pattern, it doesn’t really flow as you would expect.The “tiles” are on a sticky back, simply clean the wall and when dry attach the sticker. Ensure you have it placed right before pressing down, I peel a small area at a time to work on. They are designed to slot into one another and can be cut if you need to to fit corners and wall size. They are thick but easy to bend if required. The “tiles” are easy to wipe clean when dirty.They are quite expensive at £34.88 so if you need more than one pack the price will start to add up. However, these are probably my most favourite design as yet.