🚚 Drive with Confidence—See Everything, Miss Nothing!
The DVKNM Upgrade Dual Backup Camera Monitor Kit features a 7-inch LCD with a high-definition resolution of 1280x720p. Designed for trucks, semi-trailers, and RVs, it boasts an IP69 waterproof rating and advanced night vision capabilities, ensuring safety and clarity in all driving conditions. With easy installation options and customizable settings, this monitor kit is the perfect companion for any professional on the road.
Manufacturer | DVKNM |
Part number | TZ102 |
Item Weight | 2.44 Kilograms |
Product Dimensions | 19.3 x 2.54 x 17.02 cm; 2.44 kg |
Item model number | TZ102 |
Size | 7.6x1x6.7inch |
Color | black |
Voltage | 12 Volts |
Installation Method | Surface Mount |
Item Package Quantity | 1 |
Batteries Included? | No |
Batteries Required? | No |
S**A
Easy Install
I brought this camera kit for my boyfriend birthday who’s a professional truck driver. The same day it came he installed it with no issues and it was pretty quick. He’s only using one camera for the trailer at the moment but we took photos and videos for night view/day view which he said both were clear enough and good quality. Great price for this! We even went to the truck wash right after and the water had no affect to it.
C**Y
Good picture and relatively easy to install
Picked this up to give us rear-view mirror functionality in a cargo van without back windows. Installation was fairly simple, however I did have to cut the camera wire to route it through the existing cable path into the back door. Reached out to tech support first and they confirmed that it could be done, and said that even if I do end up breaking it, they'd send another cable at no cost.The splice itself isn't the easiest: there is an aluminum shield around the outside that is tough to keep intact when stripping the rubber insulation, and the 4 wires inside are very small. Still, there was plenty of slack (they give you like 50' of cable), so I was able to expose all 5 and twist & tape like ends together. I do wish there was a factory-supplied splice option, as many customers will need to do so for cable routing or just to reduce the cable length. While the wires are too small for wire nuts, Wago lever nuts would work well as would a terminal block. Obviously solder + shrink wrap is the best solution.Once the cable was ran, mounting the camera was straightforward. I took off the overhead storage compartment to install the screen upside-down where a mirror would be, and the screen supports rotation and remembers it's setting so once dialed in, it works perfectly.To power it I actually tapped off an existing 120v outlet using the vehicles built-in inverter (Nissan NV2500 cargo) and used a transformer with 12v output rated higher than the camera and screen (I believe I used 1a). This allowed me to turn the camera and screen off and on with a factory toggle switch in the dash. If I ever remove the dash, I'd be inclined to replace that with a dedicated toggle switch and fused DC feed.The image quality is good: standard def but not too grainy. I did notice that bright light sources such as the sun will turn black to prevent it from washing out the rest of the picture, and that it compensates for low-light conditions. I have not yet driven it at night so don't know how well the IR emitters work.Overall the camera has done it's job and tech support was quick to assist. The price was certainly right, so if I needed a similar setup I'd certainly buy it again.
ح**د
ممتازة جداً
…
S**N
Great buy.
Package arrived ahead of indicated time.Great instructions and had it wired up and operating quickly.Great picture. Only negative ( and it's not really) is that the leads are too long for my application. ( Caravan and car setup). Ideally an option of a shorter lead and joining fixtures would be awesome.
D**N
DVKMN Backup Camera Review
Great Quality. Used on pickup truck. Works as stated.
Trustpilot
2 weeks ago
2 weeks ago