SUNPIEPROATUO Chrome Bezel Cree Chip LED Motorcycle Headlight wit High 60w Low 40w Beam for Victory Cross-Country Motorcycle headlight Assembly for Victory Vegas

The light fit perfect on my 2010 Vegas. Very bright and very easy install. I ordered the black light and it looks good on my eight-ball. I saw quite a few negative reviews ( no directions, light not working correctly, fitment) that had me sceptical, but hesitantly ordered it anyway. Very happy with it so far. There where directions in box if you really need them, but on my bike, it was one bolt, 7 screws, and plug the two wire connectors to it that didn't even take 10 minutes to complete. Took longer to re-aim the light than to install it. Light is very bright, especially the high beam, and this price is a steal compared to factory pricing.The only thing I found is they don't tell you which plug goes where, so it's a 50/50 guess. Don't know if all Victory's are the same, but the plug with yellow wire (top/low beam) went on the left plug on light and the plug with the green wire (bottom/high beam) went on the right, viewed from sitting on bike. Even if you guess wrong, it would take 5 seconds to switch the plugs. So far I'll give 5 stars, but will update if it has issues.

For my 2012 CCT with HID light it did not directly wire, I had to splice a plug to my existing wiring to work.Once complete, loved the looks and for night riding, lowbeam really lights up the sides of the road and enough in front. Highbeam provides excellent distance visibilty.

IT is bright and worked properly and easy install i would buy again

I would give 5 stars but the instructions are a bit off. But you will figure it out. The headlight itself is not marked on the inside high and low. So just test it before pushing the wire harness in all the way.

This headlight was an upgrade from the stock halogen headlight for a great price, however, the instructions (or lack there of) made it difficult to determine which connectors went where. This was installed on my 2006 Victory Vegas Jackpot to enhance the look and increase the brightness for night time riding. The install was easy once I figured out which plug went where. The high beam plugged right in, (on the right side of the assembly, BTW) with no problem. The Low beam did not. The factory plug for the original low beam halogen lamp was different from the socket on the new assembly. I purchased a compatible plug and spliced it onto the factory wiring. Once everything was wired and plugged in, I turned the key on and.....nothing. The low beam did not come on. I flipped on the high beam and it lit up like a Christmas tree. I did some research and found that some of these aftermarket upgrades have reversed the positive and negative terminals apparently due to updated wiring harnesses on some of the later, newer model Victory's. I swapped the wires and tried again...TA DAAA! Everything worked as advertised with one exception-the two small lights on the bottom corners (below the high beam bulb cluster) flickers slightly when in low beam operation. The flicker disappears when the high beams are turned on. Im not sure why it's doing this but all the wiring is solid, new battery, fuses and relays are good, and no other electrical issues. It seems like there might be a loose or defective connection internally.Overall, I'd give this product 5 stars for the overall brightness, 4 stars for quality (5 if it didn't flicker), and 3 stars for ease of installation and instructions. I just wish the little flicker would go away!