Birllaid Static Clings Dimmer Sheets, 6x3 inch x 3, Light Blocking Stickers for Electronics, Polyethylene Terephthalate, Black, Single Use, Square, Led, Readable

This worked perfectly for dimming the super bright display on my wine refrigerator. The stickers look very dark in the picture, but that's probably because there are 4 of them together. A single one will dim the light about 50%, which was exactly what was needed. The sticker holds firm and does not leave any residue if you remove it (I had to replace the first one because I cut it too small).

The LED display on our humidifier is extremely bright. It's very annoying especially at night. These static cling dimmer sheets work beautifully. They stay in place even in a humid area. They're thick enough to reduce the light without completely blocking it out. It matches the black on my humidifier perfectly so you can't even tell there's anything covering the LED panel. The sheets seem very durable and you get 3 sheets so I love the value. They're easy to apply, simply peel the backing off the sheet and it clings to whatever you need with no bubbles. If you do get bubbles just peel back off and reapply. No sticky residue like with stickers. If the sheets are too big for your needs, cut the sheet to your needed size before you peel off the backing. I highly recommend these dimmer cling sheets.

These work great. I have one xl digital clock on my bedroom. The led light is so bright it wakes me up every night. These peel and stick dimmer clings are the perfect solution! No need to replace my clock now!

Finally a film that dims and doesn't 100% block out the light. Used it on my controller for my electric blanket. The lights on it were extremely bright. They only give you 3 small pieces but it did the job. It was a little difficult peeling off the part over the sticky film but it worked. Just use 2 pieces if you want it to dim more.

My new favorite purchase! I was looking for ways to dim my baby monitor. I’m a very light sleeper and don’t love lights in my room at night but also didn’t want to go without the baby monitor (yes I can just turn the screen off and keep the sound on but the monitor sits on the dresser across the room and I don’t want to get up to turn the screen on if I have to). These sheets were super easy to cut and stick on and helped dim the screen significantly! I can still see the screen fine during the day, too.

Even on smooth, non-fabric surfaces, the adhesion is disappointing. And if the surface is other than metal or plastic, this product essentially won't work for you. I should have realized it, but i hoped this solution would work for a sound machine/digital clock with a very bright light display. The surface of the clock is fabric because of the speaker.

Why does every electronic device need LED light that is bright enough to guide a ship to shore? My router, my TV, my humidifier—my bedroom looked like the Las Vegas strip at night. I couldn't sleep.The Solution:These stickers are genius. They are just little tinted circles. You stick them over the light.Performance:They dim the light by about 80%. You can still see that the device is on, but it doesn't burn a hole in your retina.Adhesion:They stick well but peel off without leaving goo. I went on a spree. I covered every LED in the house. The darkness is beautiful. I slept for 8 hours. 5 Stars.

Works great. I love it. Does exactly as it says.

I needed a way to dim the display on my treadmill. It was Way Too Bright and there was no way to dim it.These Birllaid Static Cling Dimmer Sheets worked perfectly for me. They were exactly the right size 6" x 3" inches so I didn't even need to cut them.Installation was a bit tricky due to a lip on my treadmill display and the hard plastic backing sheet on the static cling overlay. These sheets are similar to a screen protector for your cell phone only tinted. After two attempts I was able to get it centered correctly with only a few air bubbles. Even with the air bubbles it looks ok. You get 4 sheets in the pack so when the time comes to install a new one, I'm sure I'll do a better job now that I've got the hang of it.Performance wise these Dimmer Sheets are GREAT! They did exactly what I wanted. They dimmed the display but about 50% which significantly cut down the glare and reduced my eye strain. Without the dimmer sheet the glare from the screen was too bright and I had to cover it with my phone or a book. Now I can leave the display uncovered and view it during my workout.Overall I'm very happy with these dimmer sheets. They are a bit finicky to install and remove but work great.I would highly recommend these dimmer sheets if you want to dim an LED display.

It's exactly what I wanted. Sticks on flat surface perfectly. My humidor has a bright display behind glass. Dimmed it 90% with 2 layers. Cut both off the 1 of 3 sheets. Absolutely what I was looking for. I might make better cuts to make it pretty but. It was stupid bright before.

I bought this to install on my new microwave clock, which was too bright and hard on my eyes. It worked perfectly. Took the sharp light off and left the numbers bright enough to be seen clearly. I am going to use some of the product to cover my alarm clock numbers, they are so bright that they light up my room even in the dark.I am very pleased and will recommend it to my friends.

Bit pricy, but it works great for my baby monitor which is too bright at night even on the lowest setting.

Wow, I'd much rather use this as a screen dimmer at night before bed than those screen dimmer apps. I'm giving this 5 stars because it dims and touch screen works great through it. It does the job well. Removable and restickable. Would recommend it.