MG Chemicals 8341-50ML No Clean Soldering Flux Paste for electronics SMD, PCB, non-conductive, lead-free, 49.0 g Jar, Pack of 1

Nice quality soldering flux paste in a easy to use splunger dispenser. The metal nozzle is a good size and lenght which aids in applying the right amount of flux. 8341 is a no-clean, halogen-free flux with non-conductive, non-tacky, and non-tacky residues, ideal for touch-ups and reworks, so does not require cleaning after use, (but i always clean after soldwriing with IPA regardless). Works well with both leaded and lead free solders. I would recommend and purchase again.

Its good flux. Helped with dualsense controller repair. Does the job well for decent price.

I've been using this MG Chemicals 8341 paste for electronics repair and hobby projects, and overall, it’s a brilliant product. It's truly a no-clean formula; the residues are minimal and don't need scrubbing off, which saves loads of time. It really does an excellent job of promoting good solder flow, especially on tricky, small surface-mount components, making the job much cleaner than trying to use a liquid flux pen. My only slight niggle is the consistency; it’s a tiny bit runnier than other pastes I’ve used, so you have to be careful not to push too much out of the syringe at once, otherwise it can get a bit mucky on the board. But for the price and the results it gives, especially on old or oxidised pads, it's definitely a top-tier performer in my kit.

Little goes a long way, it's no clean but it leaves to much of a sticky residue so best to clean up after soldering.

Helps a lot when soldering. Good applicator.

The Best Flux Gel I have ever purchased. Not sure about the 'no clean' because it does leave a mess all over the pcb. Will buy more when mine runs out. Great for 0.5mm pin pitch chips.

To be fair, this is my first experience with using flux paste. Previously I've relied on just flux-cored solders for through-hole work and more lately, liquid brush-on flux. I'd expectations of something that would flow easily from the syringe, but without excessive spread thereafter. In reality, as others have noted in their reviews, this is about as thick as it could be and still make it out of any reasonable size syringe needle. And it seems somewhat grainy too. I think the nail in the coffin for it as far as I am concerned is that once out of the needle, it doesn't adhere well to either pins or PCB tracks - it's far more interested in sticking to itself and the needle tip, and making a mess in the process. I thought this would make repairing and reworking through-hole boards faster but the reverse is true, and I'll either revert to liquid flux, or seek a less viscous gel/paste. On a positive note, it is noticeably less tacky and easier to clean using IPA-based solvents than simple rosin-based fluxes.

I have wasted so much money trying all sorts of flux but I am extremely happy with this. When it arrived in the tub it was a bit solid, but a few stirs with a wooden stick got it into a nice sticky paste. My method is to dab a paint brush in it and then apply it where needed. Makes the solder flow very well. A bit pricey, but all flux is, and I love this stuff - will be ordering more.

I bought 10ML of MG Chemicals - 8341 on 4-2020 and I forgot I had it for over 5 years! Well I popped the top and to my surprise it was absolutely perfect. I quickly noticed it was really thick and moderately difficult to push out of the large nozzle. I was testing my new Sequre ht 140 hot tweezers. With the assistance of this flux it worked like a dream. When heated the thick opaque cream turned sticky and runny. Spanning out away from the heat source. As I heated the pad on the board and feed the Kester to the tip the flux did it's magic and a beautiful mound of solder formed on the board pad. Not much smoke at 350C and no smell was detected. Being 5 plus years in storage it worked perfectly. I felt that satisfaction well up inside me as I moved to the next pad. The only let down was cleaning the flux off of the board. I was as sticky as a glue trap for mice. ISP had to be applied and scrubbed 4 times to remove it. Aside from that, the flux functioned perfectly and was easy to use. 5 star product as I see it.

Fa egregiamente il suo lavoro

J'ai récemment acheté la pâte de flux sans nettoyage de MG Chemicals et je dois dire que je suis très satisfait de mon achat. J'utilise ce produit pour le brasage de composants électroniques sur des circuits imprimés, et je dois dire que cela fonctionne à merveille. La seringue de 10 mL est très pratique et permet une application précise de la pâte de flux. J'ai été agréablement surpris par la qualité du produit, qui a permis une soudure facile et sans défauts. De plus, le fait qu'il n'y ait pas besoin de nettoyage après utilisation est un véritable avantage pour gagner du temps et de l'énergie. En comparaison avec d'autres produits similaires sur le marché, je trouve que le rapport qualité-prix de cette pâte de flux est excellent. Elle est un peu plus chère que certaines options bon marché, mais la qualité et la facilité d'utilisation supérieures en valent vraiment la peine. En résumé, je recommande vivement cette pâte de flux sans nettoyage de MG Chemicals à tous ceux qui cherchent un produit fiable et pratique pour le brasage de composants électroniques. La qualité est au rendez-vous, le prix est raisonnable et l'absence de nettoyage après utilisation est un vrai plus. Je suis très satisfait de mon achat et je n'hésiterai pas à réutiliser ce produit à l'avenir.

This is an excellent product, it is easy to use and achieves a good result with good solder flow.

Geiles Zeug. Zwar nicht "tacky" aber tut was es soll.