AUTOANDART Replacement Driver and Passenger Side Halogen Combination Headlight Assemblies Compatible with 1999-2002 Silverado/ 2000-2006 Tahoe/ 2000-2006 Suburban

Good buy

Están bien,pero la luz que despiden no se abre,solo se ven los spots donde apuntan los faros,falta un diseño que ilumine más amplio. están aceptables.. Los que compre hace año y medio,se pusieron de color opaco en un año..Espero que estos me duren un poco más…Los orijimales me duraron 18 años…

A bit hard to install. Molded holes not an exact match to OEM, but if you work at it you can get the pins back in.

Let me start by saying, I typically don’t leave reviews for things I purchase. This is the second set of replacement headlights I’ve purchased for my truck. The first set was a different brand, and lasted about a year and a half. The quality wasn’t great, but they were good enough. There’s a ton of options on Amazon for you to sift through. I bought these with the mindset that they can’t be any worse than the first set of replacements. I was pleasantly surprised when I opened the lights. The quality of these are what I would consider just below OEM. The beam adjustment screws are in the factory locations, the mount housing is almost as sturdy as factory, and they practically fell into place during install. I suspect the reviews that complain about fitment issues, are by people that didn’t realize you have to remove the black plastic protective cover from the one beam adjustment screw. All in all, these a solid option to replace faded or damaged factory headlights.

Great fit, actually as bright, if not brighter than original. Replaced my 12 year old, still clear headlights which had the inner reflective coating start to "bubble" and gained about 20-30% light back. I knew the light was getting dim, even with new HD bulbs. Initially I was shy to try these as I recently tried another brand (the "Arachnid" with a Y brand) and they actually swallowed 30%-ish of the light compared to the old lights. These are cheaper, and brighter than the other brand I mentioned.They were adjusted nearly perfect right out of the box. Minor adjusting needed, but easy with a 5 or 6mm socket and 8" extension. You will have to take the plastic protectors off the back of the adjustment screw (see picture), I am guessing those having trouble fitting the lights into their truck didn't think of that. They will not fit with them on, and they are not there to adjust the light, but to protect the screw while shipping. (This advise may take care of about 10 of the 1 star ratings ;-) )All in all, a solid deal. I am very happy, should have done it sooner.

My old headlights were deteriorated. I looked into refinishing, but even the best of the kits needs to be redone every six months. I no longer drive that much, so these were an easy decision. They fit as well as the OEM assembly. Of course, the OEM doesn't fit that great. You have to fiddle some to get both of them in past the grill, but it does get there.I'm guessing these are likely not the same quality plastic as the original, and if I was still commuting every day, I'd have sprung for the GM parts with their better plastic and good UV coating. But if these last me a few years, that's all I need. The lamps supplied seem okay, but I'm keeping my old ones, just in case. Changing them out is a very fast job with no tools needed.

This is my second time to replace the headlamp assemblies. I bought my truck in 2006 and in 2015 the lights were dim and the housings yellowed and crystallized. I purchased these housings and what a difference!!! I also changed the bulb from the standard bulbs to the next level of brightness. My brights are still looking good but I have began to notice the low beams are slowly getting dimmer and I could see a yellowing of the housing forming again. I cleaned the housings and it made an improvement but not to the degree that I had when they were new. So I bought another pair. Giving four stars due to replacing after just 2 1/2 years but it is good to see again.

I didn't realize how fogged and yellow my light housings were until I put the new ones next to the old ones. What an improvement! It literally only took me 5 minutes to replace both light housings since the bulbs came with it and were already installed. I just had to plug the wiring clip to the housing. They look perfect and are much cheaper than GM Parts!