ESR for MagSafe Sticker 360, MagSafe Ring Magnet, 2 Pack Magnetic Ring, Universal Magnetic Wireless Charger Conversion Kit for iPhone 17/16/16e/15/14/13/12/11, Samsung Galaxy, Google Pixel 10, White

I’ve been using the ESR MagSafe Sticker 360 Ring Magnets for a few weeks now, and they’ve made a noticeable difference in my phone setup. I, personally, chose to try these out for my phone due to the VERY THICK case I use (something to do with a "box" of "otters") preventing the phones built-in MagSafe from being usable.Pros:• Strong Magnetic Hold: The magnet is surprisingly powerful and holds my phone securely on all MagSafe accessories—even in the car.• Wide Compatibility: Works perfectly on cases or devices without native MagSafe support.• 360° Alignment: The ring design helps with precise alignment, so accessories stay centered.• Easy to Install: Clear instructions and alignment guide included made setup simple and quick.• 2-Pack Value: Great to have a backup or one for another device or case.Cons:• Adhesive is VERY Strong: Once placed, it’s not easy to reposition. MAKE SURE you get it right the first time. (Half Pro, Half Con?)• Slight Bulk: Adds a bit of thickness to your case, but nothing too noticeable.• Finish Can Show Wear: After a few weeks, the finish on the ring shows light scratches.Overall, this is a fantastic solution if you want to bring MagSafe functionality to a non-MagSafe device. ESR did a great job with quality and usability. Definitely recommend!

I'm using this in ways it says not to, so grain of salt here, but it works perfectly for me.- I'm using it on a Pixel 9, not an iPhone or the listed Samsungs. Since there are no templates included for the Pixel 9, I had to play around with placement for a while before I was comfortable that it would work for charging. I eventually found that one of the Samsung templates did actually place it very close to where I needed it, but that was only because the alignment adapter didn't fit all the way into the charging port as intended. See the photo for what I mean. But as long as you "practice" placement first to find the best spot, it can work on other phones not listed. (I recommend placing the ring on your magnetic charger magnet to magnet and then moving the phone around on top to find the best spot... then press the phone down to stick it.)- It adhered very well but I'm using it on a vinyl skin, not a case. So there's less interference but it could also be less durable since it's only as strong as the skin is. It's held up for the few days I've had it installed but if anything changes, I'll update, though I wouldn't fault the ring for that since I'm not using it as instructed.- The magnet is very strong. I use a magnetic wallet and it attaches much, much better than the Magsafe MOUS case I had on previously. That was strong enough not to lose the wallet but I could remove it quite easily myself. With this, the wallet isn't going anywhere and it takes quite a lot of force to remove it for charging.- It's super thin and light but holds well. I got white and it looks nice, even though it's obvious. I don't anticipate needing the second one unless something happens to my skin and I need to replace that, but glad to have it as a backup.All around very much recommend. And for what it's worth, I realized I own 2 other ESR products—the 3-in-1 travel charger and an iPad case—and both are great and very high quality. So I'm now on board with this brand at this point. We'll see if that continues.UPDATE 6 MONTHS LATER:DURABILITY: The ring has been working great! And still very white (no staining) and not a scratch on it despite the fact that I slide my wallet on and off and put the phone on and off a standing charger daily. However, I accidentally ruined my vinyl skin—dyes from a new pair of jeans I didn't wash enough first mreh—so since this pack comes with two rings and I had an extra lying around, I decided to just replace my skin/ring. This gave me a chance to try and destroy the old ring while it was still attached, just to see how it held up...... yeah, that sucker ain't coming off naturally heh. And it took a of scrapes but was still magnetized (and charging) just fine. I eventually just removed the vinyl skin with the ring still attached so I could move on. It holds up!TEMPLATE: So the SAMSUNG A template does indeed work for the Pixel 9. Last time, I'd discovered afterwards that this particular template was very close to where I'd eventually installed the ring after a bunch of testing. This time, I just went straight to using the template. So, I installed my new vinyl skin, plugged in the template attachment as far as it would go, put the Samsung template on rung A, and stuck down the ring. All is well. Worked like a charm!

Perfect product to add MagSafe. I use it on my iPad for a phone cooler and it works like a charm, the adhesive is really great and magnets are also very strong. Very easy to setup , it comes with alignment guide and everything you need for Samsungs and iPhones. So far very durable Highly recommended if you don’t have MagSafe.

Comes with everything you need to easily apply the ring onto the phone in a small package: wipes, rings, alignment guide, and instructions.Its quite durable considering the thin profile. Sticks surprisingly well and roughly works on even the worst possible cases. Just make sure to clean the surface well and firmly press down and hold so that the adhesive stays on strong. Took some effort to take it off, had to bend my case to do so.It also holds on very well to anything MagSafe related, was able to lift up my Anker MagGo charging stand by the phone.However, one downside I found that leads to me probably not using it is the sharp edges on the ring. I tend to hold my phone quite close to the palm and in addition, "slide in" my hand to grab the phone. The sharp edges make it quite uncomfortable to grab my phone.Regardless, I'd suggest giving it a try even with the problem of the sharp edges as it'll depend on the way you use your phone meaning you may not even run into the same issue I have.

Bought for a Pixel 9 Pro XL. Very strong adhesive and the ring does exactly what it's supposed to. This is a good, affordable option. And, yes, it works with the Google Pixel Stand.

I recently received my ESR MagSafe magnetics today, I have a Otterbox Symmetry thin case which is very nice with the exception the magnetic MagSafe isn't very strong at all. So I just put it with my cases I won't use. I discovered these magnets on Amazon and since I have three ESR cases already with strong MagSafe magnets I decided to try then. I must tell you that these MagSafe magnets are very strong as I use wallets and charging devices such as Anker 10,000 mah and ERS 5,000 mah and they work extremely well. My ESR wallet is very secure. I strongly recommend these add on MagSafe magnets if you need additional strength for your MagSafe attachments.