DITRIO 18pcs Motorcycle Led Lights Kit 12v with Turn Signal and Blinking Brake Light Features for Motorcycle Harley Golf ATVs UTVs - M18r

The media could not be loaded. Excellent purchase. Installation wasn't terrible after figuring out signal wires on the bike; finally found it online. Took way longer than I thought it would for me to do the install myself, only because I was indecisive regarding the configuration. SO MANY OPTIONS! I kept changing my mind, or trying new things. Made it a weekend project and I'm pleased with how it turned out. I actually had more lights than I probably needed, but I ended up using them all since i paid for them. I added the extras to foot pegs and underneath the body, and on the v frame, but they're not connected. However, if any case I want to be brighter or more noticeable, i can just connect the clips as the lights are already in place. Personally, I prefer ambient lighting, rather than seeing the light strips. I didn't need to use all the splitters or extensions. That's what took the most time, is mapping out which wires you'll need and how you'll connect them all. I probably remapped the bike like 3 or 4 times. You'll think you have it how you want it, to later realize you can put that here instead of there, and that there instead of here.....over and over and over again. Perhaps I was over thinking things and made it more complicated than it needed to be, but I wanted it just right. The little connectors are great and made things super easy. Couldn't imagine installing these without them. My only concern is whether or not to go back and heat shrink all the connectors to ensure water protection and prevent them from disconnecting. The adhesive tape is great as long as you don't peel and reapply too many times, otherwise you'll need some type of bond agent eventually, so make sure you plan it out well. As far as the programming, it's pretty good. The lighting effects are pretty standard, i.e. strobe, fade, smooth and blink. The highest setting is pretty bright which is nice. The lowest brightness allows for a nice subtle look. The color selection is not bad. Having a key fob control is convenient. And i keep the bigger remote in my jacket. I wish the turn signal was a bit more amber orange instead of a white yellow orange, to match the OEM bulbs, but I suppose it will do was it was designed to do: make your intentions more visible. I'll upload a video later. Overall, great purchase, especially if your bike is chrome accented.

Purchased for a 2001 Vulcan Classic 1500. It is easy to install and the lights are bright and add a nice look in the evening and at night.

The media could not be loaded. I've been using Ditiro kit since 2020. I have installed and used on my personal bikes and customers bikes. Never had one issue. It's the best price for an amazing kit that offers everything in one box. I have used all the variations of this kit. The video with my review proves it. Super easy to install. The overall color and appearance of the lighting is top notch. You can be very simple or get very creative with the lighting like I have with my lighting builds. I love this kit only one I trust and will continue to use. It just works with no problems. Best part does not interfere with other cheap kits on the market has it's one frequency and every kit it's unique to it's module. Works in all weather conditions. The remote is basic has it comes but I like it you get a full size and a keychain controller. It just works. Keep making an amazing product.

The media could not be loaded. I purchased and installed these within the last week. I really wish the instructions were better, regarding installation. I ended up wire nutting the brake line, since it's not exactly common sense as to where to connect that line. I also found the pos and neg "crimps" were extremely stiff. I used needle nose pliers, but had to squeeze with both hands and stand on the pliers on concrete to get a solid crimp on those lines. It would have been great had those been pre-crimped on delivery in the kit. Fortunately, on my 2012 HD Fat Bob, I was able to wire the majority of connections and keep the connections under the seat. My bike doesn't see much rain, or water in general, but I definitely prefer the connections to be housed "out of the weather" as much as possible. When installing the strips, I'd highly recommend checking out YouTube installs (even if alternate brand) to see where folks are placing them. I ended up only using 9 strips (so far). The 3M tape is great for adhesion, so you shouldn't have any issues applying them. Make sure you at least wipe the surface clean prior to installation. I had ordered a set of extensions at the same time as the kit, which I'm thankful I did. On my bike, anything beyond the front of the tank absolutely needs them. The flat remote is nice and very easy to use. I haven't had a good opportunity to test the distance it will work, but inside my garage I've had no issue. The key fob still remote is "ok" at best. I wish the buttons were labeled basically any other way then A B C D. If you plan on using that remote regularly, spend some time figuring out which button does what. The kit claims to have a wire that prevents battery drain, but there's no explanation as to how exactly it works. I'm not brave enough to leave mine on extended periods of time and just trusting the product description. Overall, the strips are nice, bright, and relatively easy to install with minimal to moderate mechanical/electrical knowledge. I'd recommend connecting the strips and holding them in place before actually applying them. This will give you a good idea of how it will look before you commit to placement. I've provided a couple images and a video of my kit. I also had one single large strip where two of the "bulbs" would not stay solid. They'd flicker nonstop. I contacted Ditrio and they are mailing me a replacement already. +1 for customer service!

I ordered these lights Mar 2023, the installation was easy following the wiring diagram provided. Love the brake light, turn signal & music features. A little over a year after the purchase I had problems with the lights, I sent the seller a question and they sent back detailed instructions on what to check. Turned out 2 light strips were bad. I asked what it would cost to send 2 strips to me and the seller asked for my address and sent 2 strips for free! A year after purchase they stood behind their product. I'll never get LED's from another company and have recommended them repeatedly to guys I ride with. Best set up for the price...excellent light array and the best damn customer service you could hope for

Installed this kit on a Kawasaki Vulcan custom, looks amazing. Very bright. Installation was a breeze with the integrated adhesive strips on the back of each LED strip. Just make sure you clean the surface with rubbing alcohol first. The kill switch integrated into the wiring avoids having to use a relay triggered by switched power.

配線して、テストしたまではなんとか良かったのですが、数日間経って、点けてみたら点かない。また、粘着テープはあるものの、ライトの帯に型がついてて、素直に取り付けできない。カスタムサービスも簡単には連絡がつかない。やっぱり中○製はいい加減だ。

If could add extension one to one wire will be good. Longer led strips required for RYKER sides and bottom.

I install this set on a new 2024 Harley Davidson Street Glide, I needed some different size cables, after contacting Ditrio team they help me to resolve my issues with the already provided extension, but I needed some extras for less bulky wires.10 out of 10...

明るくて、良かったけど、時々　点いたり点かなかったりするので外そかと思ってる耐水性は雨の中で走って無いのでわからない！