Fuel Pump A3518M Compatible with Lesabre 00-05 3.8L, Park Avenue 98-05 3.8L, Deville 00-05 4.6L, Seville 98-04 4.6L Bonneville 00-053.8L/ 04-05 4.6L compatible with E3518M

Great product

I installed this fuel pump for a 2003 Buick LeSabre and the fit was perfect. The pump comes with almost everything you need in order to install it in your vehicle, including: gaskets, a fuel vapor sensor (black thing on top of pump), a new wiring harness (you'll have to splice it into your old one), and the necessary wire connectors. The only other thing I would recommend you buy in addition is the fuel pump locking ring (less than $10) because my original one was completely rusted shut. It require a lot of bashing with a hammer to get out so save yourself the trouble and get a new one of those.Installation was pretty easy and the hardest part as I mentioned above was removing the old locking ring. The wires for the new wire connect do need to be stripped more than what is already pre-cut so make sure to do that to get a good contact.I'll update if anything changes but so far, a great pump for a great price.

Just installed this in a 2001 Pontiac Bonneville. you can expect it to be a 99% direct replacement. you WILL have to do some re-wiring as this fuel-pump has a different electrical connector than the OEM pump. The new connector is included in the box, though.due to this fact, you will have 2 options:1. do what everyone else does and cut the old factory connector off (from the car's wring harness) and replace it with provided connector.2. do what I did and once the old pump is out; take the connector that sits on top of the OEM pump (the female-end that the OEM connector plugs into) off and wire THAT female-end connector to the newly, provided connector. there are 2 tabs (1 red and 1 grey) that can be pulled out from the underside of the female-end connector to release it. and then use a small screwdriver to gently pry it out from the top of the pump. what all this allows you to do it KEEP your factory harness intact and un-modified. you know.... just in case. Just mind your wire colors. they will be slightly different. youtube vids will help with that.once everything is wired-up, i do recommend turning the car to the "ON" position and listen to see if the pump engages (which sounds like a hum or buzz) BEFORE installing it completely. but remember, sparks and gasoline DO NOT mix, so be smart if you choose to do this. don't make yourself a Darwin Award Candidate over this.

This would have been an easy install if it had an OEM style plug which meant cutting off the plug on the car end of the wires and splicing on the new plug. This meant working in the forward part of the trunk (since it has a trunk access panel) in a rather confined space. But we got the wiring correct the first time and everything work fine including the gas guage.

Good Quality , Fits Perfectly

Works great , good value

Eazy installation on my 2002 lasabra.

This fuel pump is the biggest POS, not only did the box come with painters blue tape on the bottom of it the new electrical connection wouldn't snap on the new pump and the pump itself didn't even power up once a hard wired it. I would try to get a refund but it was installed in the gas tank. So spend a little more money and get a better brand.