SP101 Flameproof Coating Very High Heat Spray Paint – White Flat Finish – 11 oz Aerosol Can

It is not the first time I am buying and using this High Temp Paint spray, either Flat Black or Glossy Black. It is relatively expensive and it provides good results on hot surfaces: it depends very much of the kind of the surface and the preparation work being done before the application. In my opinion, it provides longer durability when applied over a cast iron part (ex: exhaust manifold) than o a new exhaust pipe or muffler -- it will start to flake after several months, in particular off the aluminized or factory painted (exhaust) parts. On older exhaust parts, I had better luck after removing the surface rust and cleaning with good brake cleaner. Painted over the exhaust wrap... mixed results. It the wrap is in areas that are some more exposed to whatever flies under the vehicle, the paint and (later) the wrap is not going to last long, as they are not quite abrasion resistant. Otherwise: read and follow the instruction.

Easy to use and beautiful when done

Worked amazing. Only time will tell if it is long lasting

Got the paint, rattle the ratsh-t out of it for over the span of 2 days without a mixing ball. Said to heck with it since I'd like to wrap up my project and only need the paint and primer to function as a sealant of sorts. I used Rustoleum 2000F Primer and cured once at 250F, once at 400F and twice at 450F (my oven doesnt go up to the recommended 600F) The primers finish came out great, I received this can of VHT and after deciding to just "send it" despite the lack of mixing ball, off I went. I made sure to shake up the paint as good as I possibly can to give it (and myself) the best shot. I was expecting dribbly nozzle action. The can worked as normal, the spray pattern and atomization seemed unaffected (keep in mind I shook the hell out of it for at least 3 collective hours). I cured this the exact same as I cured the primer. The finish was pretty good except for a few spots where I may have oversprayed a little bit, only very slight miniscule bubbles on one or two areas. I let it cure again at 450F which seemed to harden up those bubbles a little more so I figured it was fairly well cured. Lots of off-gassing smoking when curing, do not do this indoors. I expect more smoke when the car is started. Other than missing a mixing ball, which the rustoleum primer definitely had, I guess the product speaks for itself. This part is completely hidden in the engine bay, this was just to help the 40 year old iron with heat dissipation and to possibly prevent a surface crack from spreading. The paint was used for it's utility and not aesthetics so I suppose it's not a bad deal. Shipping was awful, but again a fault on my part since I didn't bother to check local stores. Almost a week coast to coast.

Worked well! Easy to use with consistent spray performance. The flat black color was perfect for my pellet grill. The heat source in the bottom of the grill caused the factory paint to flake off after about two years. So far this flameproof paint has held up and worked as described! No problems and I am very pleased with this easy fix.

Very good paint. Easy to spray. Durable. Nice dark black color. Hasn’t gotten ruined from the heat yet. Just make sure to prep your surface properly and sand it down nicely and you’ll have no problems with this paint.

great paint

The primer paint went on nice, then when i went to use the blue paint i struggled to get the cap off and almost got turned into a smurf when i got it off. Luckily i was outside and had a box nearby to contain the mess.

Perfect

乾燥も早く綺麗に塗装できました。 スプレーのプッシュ感も良かったです。 まだ、塗装したばかりなので耐久性はわかりませんが、良いことを期待します。

購入1本目は塗料が噴射されず返品、ダメもとで同じ販売店から2本目を購入。 2本目は問題無く使用出来ました。

Very very uneven coating, regardless of how good you are with spray cans

吹き付けて塗って説明文通りの温度時間で硬貨させたが後日クリーナーで拭いたら即溶けた。 油とかかからない所ならいいのかもしれない。