Adam's Advanced Graphene Ceramic Spray Coating Kit - 18+ Months Sprayable Graphene Oxide Ceramic Coating for Cars, Boats, RV's & Motorcycle - Adds Extreme Gloss, Depth, Shine & Protection

I was thrilled with the way this product simply goes on and just wipes off after a minute or 2 of bonding time. Just a little goes a long way. Using the Adams application pad, and the included high quality microfiber cloth was a perfect self automotive paint sealing project. Easier than any product I’ve ever used, and I’ve used many from carnauba waxes of the old days, to all the fine polishes and ceramic coating products for 40+ years and 30+ cars we’ve owned. Started with a clean new car, no paint correction needed on this Lexus, and less than an hour it was finished completely, including all windows, full glass roof and wheels. Without breaking a sweat. Literally wipe on, and wipe off with the microfiber towel. Only needed 1 towel for the entire project, as this products comes right off without effort! Depth of shine and slickness of paint is top notch. I’ll likely repeat every 6 months or so for great protection. Reflective properties are fantastic. The best product I’ve encountered!

Very pleased with Adams spray coating. This is a very easy apply and wipe off. No buffing, this is not a polish or wax that needs buffing. Not a scratch remover or cleaner. Use a cross hatch pattern to apply and remove. Remember, for best results, prep your vehicles surface. Use it on trim, glass etc. My Ram is a 2018 and a daily driver and it looks great. I was impressed how the water just beeds and slides off.

I went to use it and the sprayer that goes into the bottle doesn't properly fit. Either they sent me too small of a bottle or the wrong sprayer. Everything else in the kit was great. Will update review after using product. UPDATE: You have to push it in. I was worried the straw would break, but it didn't break and the sprayer sprayed with no problem. The kit's microfiber cloth is extremely soft. I followed the directions for application (sprayed the sponge, applied it, waited 2 minutes, then buffed it). It was a noticeable clean on the windshield. I also did some of the car near the windshield and the shine was impressive. I've used several products to try to maintain a shine on cars and help water run off of the windshield in the Florida storms. I'll update the review once I use the car in rain to see the hydrophobic quality as well. Very happy with my purchase so far. Ease of use: 5/5 Quality: 5/5

The product works as expected, I applied it on back side window and skipped front side window as a test. The front side window has a lot of water marks, but back side window is without them.

The primary reason(s) to use this product are longevity of high quality protection relative to the simplicity of application. The product definitely works as advertised in said respect. Definitely watch the videos made by Adams. The one I watched that helped the most with application was the one with the Audi R8. The Audi in that video is black and the shine may be more impressive and effective for darker car colors. That said, my car is an, "Ice Blue Metallic" the comes off as a light blue that has some pop to it. The results achieved on my car were definitely very good and, if the longevity proves true, I may come back to this review and add in the last of the five stars. Compared to other products I've used that require less effort (such as Mothers 'California Gold' Instant Detail Spray, my favorite of the 'instant' finishes or spray waxes, etc.) the Adams Graphene Spray Coating Advanced does slightly outperform all the quick fixes I've tried (about 10 finish sprays in all)... as it should! Those 'instant' products require much less effort. Wash/rinse/dry (or sometimes apply after rinsing while still wet and dry with product on using microfiber) is a quicker, easier process. I followed the directions with this product which had me 1) Wash/rinse/dry, 2) Clay decon (synthetic clay from Griots coupled with their original speed shine as lube), 3) Polish (Adams "Hand Polish", which incidentally did not impress me a lot) and finally, 4) Adams Surface Prep followed by Adams Graphene Spray Coating Advanced, applied as shown in video with the R8. That's plenty more effort than a wash and spray wax. Notably, the added efforts are not in vain by any means. The Clay decon is hugely important and effective. A good polish should follow said decon and perhaps a different product in this step would have done even more, but it did help lay the right foundation for the graphene finish. The Surface Prep prior to the graphene was tangibly worthwhile as I could feel it and see it in the evenness of the finish at this point along the way. Then, while applying the graphene coating, the color coming off the car, in mediocre light, at night inside a household garage, and with a few extra lamps... there was a visible difference in the way the paint reflected light. It had more 'substance of color' was the only words I had for it at the time. It wasn't an, "insane" or "ridiculous" shine by my standards. Had that not been what I was hoping for (insane, ridiculous, hall of James Webb mirrors variety of shine, etc.) than I would have laid down 5 stars and indicated that I would only return to remove a star after 6 months if the longevity failed. Personally, as noted above, I was probably hoping for more than what this is product is meant for and 5 stars is an 'above and beyond' type of rating. If the longevity of the variety of shine that I DO now have pans out to protect and lasts, it will deserve all five stars. The 'colorfulness' (notice a subtle rainbow hue that showed up in the picture but isn't clearly discernable in person) of the shine I got from this is definitely better than just 'definitely shiny', such as what I get from a thorough wash and, say, Mothers California Gold Instant Shine. While I REALLY like the result, it's not quite what I was hoping for in terms of - ridiculous insanity of grotesque abundance of incomprehensibly reflective and inexplicably sparkly paint - shininess. If what I did get lasts, however, I will return with a 5th star for success as advertised with a variety of shine slightly above and beyond what any normal person of reasonable standards would expect at this price point. Last point - price point - excellent value as plenty of all products involved remain in my arsenal with the only exception being microfiber plush towels. Would love to have a few more of those. :-)

SO this is the REAL DEAL! I had purchased a new vehicle and wanted to apply the Adams ceramic kit I bought for my last vehicle, but was nervous to do so because of all the pitfalls for a novice (or pro) that can happen. I was on the fence on what to do. I took the plunge, because this is a an 18 month product, it's not 8 years, so if I jack it up too bad, I only have to wait 18 months! Turns out, I did do this and I am so glad I did. What an amazing product. You must prep the car properly, because what is left on there will be memorialized under the ceramic coating. Since my vehicle was new, I wasn't too concerned. I did miss a spot of scratches, and they are seen with the ceramic and can't get to them until after 18 months. Anyway, once car is cleaned and wiped down well, all water spots gone, etc. you can apply this so the included applicator. Working smaller areas, you spray on, wait a couple of minutes until you see the rainbow look, then, wipe it off. I will say that you will need to wipe multiple times to get it all off. I did mine as the sun was setting, and used my eyes, blacklight, and a very bright large flashlight to ensure coverage on everything BUT also removal of anything I missed. What I did like about this, is unlike the 8 year ceramic, you can still wipe away high spots, or spots you missed, after the fact. I found stuff later that I missed, and was okay wiping it off. With 8 year stuff, it would have been a forever mistake. This stuff is forgiving in that way. I used this on the interior door panels too, and also the exterior plastic areas. It seems to have been the smartest purchase I made in some time! it's way more than a wax and hope it lasts a year or more. But using the blacklight, it looks so weird, it looks like you totally screwed up your paint, but it's the way it melds with the clear coat to create a sheet of what I call armor, you can call it what you like. Reduces dust buildup, and reduces need for more frequent car washes to still look good. You'll want to consider this for sure. Very good! You won't use alot either, so the size is good for more than 1 or 2 vehicles or applications. It definitely is durable too.

Much like painting a car or even a wall in your house, the key to success is the preparation. Before I get to that, let me say this product was easy to apply and for a DYI ceramic coat (none of which offer the same protection as the professionally applied ceramic which cost A LOT more) it enhances the shine and I'm confident will increase the protection against environmental contaminants. I trust the Adams products and although I routinely use other premium brands for my car care, I chose the Adams after reviews and in my past experience with their products ( I'm one of those guys who keeps his cars spit polished as a hobby!). The "Adam's Polishes Advanced Graphene Ceramic Spray Coating Kit" included their applicators and 2 microfiber buffing towels. The spray product goes a LONG way. I tested this on my "utility" vehicle, a Colorado Z-71 pickup. My choice for prep was Mothers' Surface prep (in a spray bottle) and a clay bar. After washing, I used the Mother's CMX Prep (I recommend it) and clay bar. If you have never used a clay bar before, do not panic: It is simple. After the clay bar, I misted the surface with the Mother's CMX Prep once again then wiped dry with a clean microfiber. Applying the Adams was simple: Spray onto their pad (Do not spray directly onto the vehicle!) and then slowly wipe it on in straight lines. Go ahead and do the side and rear windows while you are at it! Do one panel at a time and within a minute or so you will see it dry into "rainbow" effect. Then simply wipe it off. After a few hours curing, I applied a second coat. And the next morning after being garaged overnight, it took all of 30 minutes to apply and wipe off the third coat! AND, I will mention I still have over half of the bottle of Ceramic Graphene Spray left over even after three coats! My truck is silver which is a color not known for its "deep glossy" sheens. And be honest, the Colorado is not the vehicle on which GM applied Its' best paints! But, the Adams really brought out a nice shine and left the truck with that soft buttery slickness a detailer loves to feel when sliding the back of one's hand across the paint finish. My other vehicles have professional ceramic or else I'd use this on them as well. I am completely satisfied with this product and can recommend it to you. I intend to apply this to my mothers' Honda in the near future.

Very hydrophobic after all said & done, but it wasn’t nearly as easy as others have made it out to be. Goes on fine, but it takes a bit to ‘cure’, and once it does, it leaves behind an oily substance that almost beads up (you can see it). The videos by Adams say to wait until you see this happening. That oily substance is stubborn to remove… multiple passes while changing towels, and it is still there. Ran the wipers & what looked clear, then smears, a lot. Also, some areas clearly show a slight residue/film even after all of that wiping, which does not come out. Pita to clean up… even tried a second wash with dawn, still leaves a light layer of this oily, smudgy substance. Real pita. Mind you, you can do a three towels wipe that makes it look clear, but that oily layer is still there, ready to smudge again. Odd product from what was expecting. Don’t think I will use the second half of the bottle. Hopefully it lasts at least half as long as they advertise, I think, maybe. Update… the oily like substance is gone after a bit & two washes, but the dried residue/film remains. Some suggest it is because I waited too long before removing/buffing, which leaves behind a haze/film. More spray did not dissolve/remove, neither did the detail spray. Tried Kamakaze to strip with limited success. Played around & discovered Turtle Wax Graphene Infused Paste Wax, for some reason, blended the film & w the buff seemed to hide most of the dried film. Two coats did the trick, looks slick & clean. Also worked to remove the film/residue from windows, which is where it was most noticeable. Better than polishing the whole thing with a rotary, I suppose. This product is tricky, maybe I screwed up a little, but was trying to follow their posted instructions. Anyway, it is fixed.