BESTHLS Pull Up Bar Wall Mounted Chin Up Bar Wall Mount Multifunctional Dip Station for Indoor Home Gym Workout,Power Tower Set Training Equipment Fitness Dip Stand Supports to 440 Lbs

Very easy to put together. As the description says, this is meant to be mounted on a cement or brick wall. It does not come with hardware to mount on drywall. I took one of the hooks with me to Home Depot to find a screw that fit perfectly. I believe it was3 inches. This way it grabs the two by four in the wall really good. I also bought two 2’x2’ pieces of plywood to avoid damaging the drywall. Doing this, I had to center them perfectly so the equipment would be centered.

This is rather an interesting idea and actually works well in terms of being able to alternate the unit from pull ups to dip unit. Two real issues one needs to be aware of is that on the horizontal cross bar meant for pull ups, has two handles that come out perpendicular to the cross bar, what that means is that you can’t really comfortably put your hands on the cross bar at a traditional shoulder width apart, only on the wide outer ends of the bar or on the narrow inside of the bar. The odd handles are not something I have ever used for either pull-ups or chin ups so I have since used my hand held grinder to cut them off and then grip taped the bar, now it’s perfect!One other note of precaution, regarding structural integrity, attaching something like this where there is a great deal of wait and leverage, is never an easy task unless you are a contractor/tradesmen or have experience. Your quality of wall and access to a structurally sound surface will determine how challenging the installation will be. I used my contractor and it’s bomb proof but I could never have installed it on basic sheet rock and aluminum studs!

I was a little nervous buying this over another that was more expensive and looked exactly the same. I don’t own the other, but this seems just as good as the other listing.Pros:1. Very sturdy.2. Versatile. I can do different pull ups, dips and leg raises.3. Price was better than another listingCons:1. It didn’t come with instructions. You can figure it out by looking at the picture, but it would have been nice to have them.2. I find the arm pads for leg raises to be a little uncomfortable. I think it’s the width and they aren’t angled, so your arms have a tendency to drift out. I could probably fix this by adding some angled shims.I think it was worth the buy for the price.

The media could not be loaded.  Let me start by saying their missing out on a lot of potential buyers by not marketing this with the impression that you can mount it to wall studs. That being said they need to widen it about 1 more inch. I made a board out of maple ( because it was cheaper than OSB at the time) to protect the drywall and painted it gloss white to match the trim in the room,, but I mounted the brackets through the board and into the wall studs. The only issue with this is when it's in the pull-up position the corner of the pads are resting just barely on the corner of the brackets. Doesn't bother me and still functions great.

I’m 215lbs, it flexes a little but feels ok. Considering the price well worth it and will do what you need it to do. I would recommend to anyone .

Directions say to mount onto 1/2" plywood that is fastened to wall studs. This didn't hold for us, instead we mounted the unit onto 2x6's that were bolted to the wall studs. Very stable. Nice product. We installed it above a set of stall bars.

Now that my gym was permanently shut downed I decided to finally put it up. Very sturdy and great pull up,dips, leg raises options. Just be prepared to put together using pictures only for there are no assembly instructions included! It wasn't that difficult to figure out. I mounted in the garage onto the studs. I took others advice and mounted two 4×2 plywood boards for reinforcement (I painted them for a finished look)and bought additional eight 1/4 inch x 3 inch hex bolts to mount into studs. Used a 1/4 drill bit to start holes and then ratcheted them down snug!..let's hope I stick to using it!😉🤙

Product arrived without enough hex nuts and washers for assembly of Product (not even talking about wall mounting). Unable to use without purchasing of separate hardware completely as bolts included are not standard thread.