PHINLION 194 LED Light Bulb Blue Super Bright 168 2825 W5W T10 Wedge 6-SMD 3030 Chipsets LED Replacement Bulbs for Car Interior Map Dome Parking Door Courtesy License Plate Lights

Easy to install, 10X brighter than OEM bulbs. These do require a lil bit of technique to install, and NO you do not need to do any cutting or modifying of the map light trim to get these to fit...1) Using a small flat blade screw driver, carefully remove the round map light lenses. BE careful not to let the tool slip and scratch your trim/lenses. Be mindful of the lens mounting prongs, they can be broken if you use too much force or hurry this step. IF You break a prong, The lenses will not stay installed and must be replaced.2) grab either side of the map light trim panel and pull straight down do release the clip on either side allowing the map light panel to drop down giving access to the wiring. (This does require a lil strength, but if you do it slowly, the clips won't break, just pull STRAIGHT down and don't twist the panel when pulling)3) Grab the bulb socket clip and pull straight out of the mounting hole, the Original bulb may/may not become dislodged from the socket. If they don't just pull them out of the socket. The OEM bulbs will be really hot if they been on, so be careful. You can burn your finger removing the bulbs if they're hot.4) the new led bulbs will be wider than originals, and cannot be put back in from behind. Push the led bulb up from the bottom side and attach the sockets, then push them back into the mounting holes. BE aware these LED lights go into the socket one way to power up. They'll fit either way, so if they don't light up during a test (next step) then simply repeat step 3 and flip the bulb 180 degrees to insert it the other way.5) turn on lights to test and make sure they both light up as they should. If not, repeat step 3. IF they do, move to step 66) using both hands, line the map light panel clips up tot he slots in the roof, once lined up, carefully push upward with a slight bit of force to push the clips back in and secure the panel. The Reinsert the round lenses. BE AWARE, the lenses have three prongs, one if fatter/longer than the other two. Line up the bigger prog with the little slot on the back of the lens hole then simply push up to clip the lenses back in.7) Enjoy your new dome/map lighting.

Great replacement for a 194 bulb really bring fit just right

Easy to install and look so good

Got it like two months ago and they are burnt out already

I used these in the interior of my truck, love them, extremely bright at night, love how it makes my interior look

Bought myself a 2008 Tahoe, two days before Xmas. Couldn't wait to start accessorizing with colored LEDs. These lights were the first thing I bought to use for the rear license plate. Both lights went out within' a week or two (at separate times.) The extras didn't last any longer.I'm gonna stay with superbrightleds.com for my 194 bulbs from now on. Theirs are the only ones that have never failed me.

Replaced stock parking lights on my Motorcycle with these, look great, very bright!

Perfect LED replacement for my Jeep Wrangler JK dome light bulbs

Just installed the second bulb, will see how long it lasts.UPDATE: End of June and the 2nd blinked out. They do not last.

the item is great it works well and it so bright.....

I guess I just wasted my money buying these "unknown" bulbs.It isn't bright at all, came in a small envelope with no labeling whatsoever. no branding, nothing.the saturation is good, but that's what the LEDs are about, the brightness is horrible