300 Meter Singlemode Duplex Fiber Optic Cable (9/125) - LC to LC - Yellow

bought two 150 meter length cables for an industrial application. our heavy-handed electricians installed them, violating every bend radius, compression and pull strength norm that applies; repeatedly. the things still work. 1gig single mode. OS1. ... from now on, anything less than 400' we're going patch cable all the way.

Cheap, and works.There are much more expensive cables out there, but these work. I've run them up to 1Gb/s with no collisions or other traffic errors on my switches. The more expensive cables out there often come with fancy extras like "lifetime warranty" but if a cable fails, are you really going to bother with doing a warranty claim? Nope, you're going to replace the cable so you can get back up and running faster. These cables cost less than half the cost of the more expensive cables with lifetime warranties, so it's cheaper to buy one and have a spare ready for instant replacement.

TL;DR - This cable only required the removal of the stoppers on the ends and insertion into the SFP to work. No cleaning required and super easy to attach or detach.After using ethernet to connect my gateway to my switch for the longest I decided it was time to free up a ethernet port on the switch. Upon reading which SFP port would be best to use for my setup I found these cables. The length was great as I have my gear rack mounted next to each other and having a short cable makes for a cleaner installation. I simply had to remove the rubber stoppers and insert into the gear to get it to work. It was just as easy to remove them as well. With the cables being short there is no excess to be concerned about either. I will more than likely connect my next device via fiber once I decide how I want to expand and another short cable will do the job perfect.

Been running the mini light thingamajig for a while now. Light goes in one side and comes out the other and makes things attached to it go "beep beep boop". Other than that, I'm only running it on a 1GBit interface so I can't attest to performance on faster circuits, but it arrived in good condition and works well.

It just works, as you'd expect and hope for. I was able to pull the cable though 3/4" conduit without having to use lube or pulling jelly and it was easy to fish though the walls. I do however recommend (as with any fiber cable) you put a balloon over the ends before you fish it.

this is your standard type 10G Fiber for SFP+ connections. I wanted to step up my network to 10G and this allowed me to place my home server lab in the basement . the materials. and connections seem solid /sturdy / well fitting. Price was right.

What can you say? It was delivered on time in plastic with easily removable wire ties and it worked (I am new to this whole fiber thing, it went from fiber patch panel -> LX gbic -> media converter -> router. Worked first time. But, I think some fiber is not compatible with all, just like the gbic and router. You need to confirm compatibility.

Purchased this LC to LC Singlemode fiber jumper (10-meter length) to replace an existing one in the field that was damaged. It's a good quality jumper with good connectors. Received it quickly and as soon as we plugged it into the SFP our fiber uplink port came up. I would definitely buy it again.

I bought this to use with my PC and a 10Gb switch. It work just fine however, the cable appears to be smaller in diameter than other cables, just my opinion

Works as expected.

Very good quality.