VRSS Flexible Bendable Curved Ceiling Curtain Track With Stainless Steel Curtain Clips, 3 Meters(9.8 ft) for L, U, Circle Shape Shower Curtain Track RV Curtain Track System Room Divider DIY

I wasn't sure what to expect because the instructions were very vague on the parts I needed the most direction on. I wish they showed a close up of where the brackets attached to the track so I knew which direction to install. The picture included is from the backside of the bracket, not showing the hooks and slider mechanism. Thanks to the picture reviews by others, it didn't take much to just dive in!I had help to roll it the opposite way and then lay it out with some heavy weight on each end to keep it stretched out flat while I installed the ceiling brackets. That went well to make it nice and flat.I had a curve to add in around a light fixture, so I paused installing brackets once I reached it, to try installing the track to see how it would respond. Surprisingly, it was quite easy to contour the track. I allowed a few extra curves in for a little wavy effect.Rollers were even easier to add on and, then I capped the end with the stopper.It turned out perfectly!! Love how smoothly the rollers glide along the track. My daughter picked out a beautiful, light weight curtain to use to top it off.Very pleased! Will be buying more

I'm impressed! I read the reviews and complaints and wasn't quite sure what to expect. It comes tightly coiled and I just flexed the metal into a straight line with a curve at each end like I needed. (It's a thin flat strip of metal in the center, so just bend it the direction that you need it. You'll need to overbend a bit because it's metal- it tends to flex back.) Maybe if it's cold or you overflex it, you might break the plastic. Installed a 9' section by myself in our RV - it would have been easier with two people - but a one-person install is possible. The top of the track is flat; the bottom has a slight curve to make it thicker/stronger. Instructions? Who needs instructions?

I will admit, it's a little tricky to work with! I soaked the track in hot water for an hour, and it kind of helped, however using a hair dryer produced much better results. It still took about 30 minutes with the hair dryer to straighten it, but I was able to bend it to my desired shape easily!The only major issue I had with this track was attempting to cut it, it has a very small (.5 in~) crack near the cut, but the caps they provided cover it nicely! Other than that it works well and was super easy to install. I reccomend using the anchors they provide to make it a bit more sturdy. I bought the side wall mount kit & it was perfect for what I needed for a shower curtain.(The small crack could also be my fault due to lack of knowledge around power tools so take that with some salt)

There are fancier and more attractive systems, but for my purpose it works well. Pretty easy to install. Haven’t used it long enough to judge durability.

This worked great

Used this to create a curtain wall in my girls' shared bedroom for privacy from one another. I wasnt able to run it in a straight line on the ceiling because of the existing lighting fixture, but the track easily goes whichever direction you install the brackets. Honestly the most difficult piece to install was the end caps for the track.Perfect for what we needed it for.

This was perfect for our corner shower in our camper. We gutted everything and redid it.!

We used this flexible rod to hang a privacy curtain in our RV. The position of the lights made a straight rod impossible. This is a great solution to hang a curtain from an RV ceiling. Easy install, everything you need is in there. We laid the rod flat with heavy books and dumbbells for a week, still needed to bend it a lot to put it up. The carriers glide really well on the rod.