🚗💡 Transform your ride into the ultimate street spectacle!
The OPT7 Aura Pro Underglow LED Kit features 4 waterproof rigid aluminum light bars with 252 high-quality 5050 RGB LEDs, controllable via a Bluetooth app or remote. Designed for universal fit on cars, trucks, SUVs, and RVs, it offers endless color options, music-sync modes, and durable construction to elevate your vehicle’s style and presence day or night.
Item dimensions L x W x H | 53 x 2.6 x 2.6 inches |
Brand | OPT7 |
Color | RGB |
Form Factor | Bar |
Recommended Uses For Product | Vehicle Exterior |
Auto Part Position | Bottom |
Included Components | 1 x Handheld Remote, 1 x Inline Fuse Power Harness, 1 x OPT7 Glow Control Box, 2 x 36" LED Light Bar + Extension Wire Attached, 2 x 48" LED Light Bar + Extension Wires Attached |
Special Feature | 4pcs Rigid Aluminum Light Bar with 5050 LED, Memory, Multi-Color, Music Sync, Waterproof |
Item Weight | 4.34 Pounds |
Material | Aluminum |
Water Resistance Level | Water Resistant |
Remote Control Included? | Yes |
Number of Pieces | 4 |
Automotive Fit Type | Universal Fit |
Manufacturer | OPT7 |
Model | FBA-AURA-GLOW-UNDERGLOW-RGB-4PC-CAR |
Item Weight | 4.34 pounds |
Product Dimensions | 53 x 2.6 x 2.6 inches |
Item model number | AURAPRO-UNDERGLOW-UNIVERSAL-KIT |
Manufacturer Part Number | 090.07000.098 |
Special Features | 4pcs Rigid Aluminum Light Bar with 5050 LED, Memory, Multi-Color, Music Sync, Waterproof |
B**.
Very well made and bright
The media could not be loaded. First let me say, Customer Service was great! I contacted them through email and they responded very quickly and addressed my issue.I installed these about a year ago on a 2011 WRX. The aluminum housings are rigid and strong. I was able to easily rout the wire under body panels and attach the long side rails with Rare Earth magnets under the chassis. Using magnets eliminated the need to drill holes and hold really well. They actually hold so well you need to use a tool to get them off. This was a much better solution than using the "tape" style LED's sold by others. I have seen too many of these style lights fall off in the Florida heat. Here is a link to the magnets I used: https://amzn.to/3syoWG8 . I sourced stainless hardware locally to attach the LED's to the magnets using the tabs on the end of the LEDs. I also added 2 magnets to the middle area of each side using the included clips and zip ties. This put 4 100lb magnets on each side LED so they are going nowhere. If you do this I would recommend removing as much of the undercoating as you can where the magnets is but be careful not to damage the paint.Overall the brightness is great! I had read on other products that some people installed two sets of lights, this was not needed with these.The app works very well on my Apple phone and is easy to navigate. I plan to purchase an interior set since you can link them in the app and sync the color. The control unit is mounted in an enclosure under the hood next to the fuse box. I can connect to it from about 35' away with no issues.One thing to note, I wired these to an "always on" power source so they can be run while it's parked for car meets at night. I have forgotten to turn these off several times at the end of the night and found that they draw so little power it did not drain the battery overnight.
K**G
Nice build quality and brightness
First off, people giving bad reviews about Bluetooth connectivity probably installed the control box in the engine bay which the instructions specifically states to not do due to high temps and possible moisture. If the control box is in the engine bay, the Bluetooth signal will have to pass through more material (e.g. firewall) you’ll most likely have a weak or failing connection. A lot of people also mentioned about one of the wires being too short. I ran into this problem, but found a grommet I could run the wires through in the wheel well area and all standard wires made it into my driver’s footwell area easily. You just need to examine your vehicle to find the best path for your wires.Build quality is really nice. The aluminum frame is lightweight and rigid which helps mounting it correctly and firmly. Brightness is pretty bright and gives the wow factor, it’s difficult to make out in pictures, but in person it’s bright. Installation was straightforward, just make sure to follow the instruction guide for placement locations of LED strips, control box, and power supply. Mounting the strips is also straightforward and feels very solid.There are a few minor negative points though. The white color isn’t really pure white, it’s more of a white with hints of blue/purple coloring in it. It looks white enough, but the color isn’t accurate. Running the wires was the most difficult part of the installation. I have no experience in running wires, but I was able to bring all connectors to the control box. Make sure you avoid zip tying the strip wires to suspension components, one iffy area I zip tied was the wire to the control arm of the suspension, but I feel the control arm won’t move too drastically while daily driving. Took me about 5 hours because I was double checking a lot of things, but I’m sure you can install it within 2 hours or so.Overall, good build quality and brightness, but the white color accuracy is not that great. Other colors are very vibrant and accurate though. If you buy this, good luck! It’s a fun install and the results look great 👍🏽
W**Y
Worth the purchase
I installed four of these kits underneath my 5th wheel about a year ago. They are awesome lights that put off an excellent glow around our entire rig.You can easily change the color of the lights as well as the brightness with the phone application.These light strips are waterproof and so far very durable over our thousands of traveled miles.Additionally, the companies customer support is excellent and very timely.
Trustpilot
4 days ago
5 days ago