💡 Elevate Your Projects with Mini OLED Magic!
The HiLetgo 0.66 inch OLED mini OLED Shield features a compact 0.66" display with a resolution of 64x48 pixels, operating at a low voltage of 3.3V. It utilizes the SSD1306 driver IC and supports I2C/IIC interface, making it an excellent choice for a variety of electronic projects.
R**O
OLED inbetween size
Runs well, but the size will require some setup changes. Font is larger on default than a 0.96" display.
B**R
For those who could not get this to work
I lost a good half day on this....Issue #1: Look at the back of the shield (see image) and check if one of the I2C addresses is bridged. The image on the product page shows it pre-soldered to the default for displays of 0x3C. None of mine arrived this way however -- no address was selected.Issue #2: You need to use the "Adafruit SSD1306 Wemos Mini OLED" library to drive this and NOT the standard "Adafruit SSD1306" which only works for 128x64 and 128x32 displays.Once I remedied the above display worked beautifully.
G**N
Easy to use with the Arduino IDE. No need to separately download a library.
The display arrived when expected. After soldering on the headers, it mounted on the D1 Mini Pro stack without difficulty. Using the Arduino IDE, I went into Library Manager and installed ADAFRUIT SSD1306 Wemos Mini OLED by Adafruit + mcauser. This added support for the 64x48 display. The example code worked fine and I was able to integrate the display into my application.
T**Y
Didn't work for me
Could not get to work at all with D1 Mini. Tried the standard libraries and alternates with Arduino IDE. No luck with any of them. Returning it and going with one I used before that worked just fine.
A**S
Poor quality, i am Very desapointed
Poor quality, i am Very desapointed. If possíble, give my money Back. I am from Brazil, so it is not possible to return it.
Trustpilot
1 day ago
1 week ago