Voswitch JL800 Grab Handle 8-Switch Panel System for Jeep Wrangler JL (2018-2023) & Gladiator JT (2020-2023), Patented A-Pillar Mount, RGB Backlight, Master Mode & Flash Strobe

Shipping was great! Great packaging well protected. Installed was very easy. Functionality is very nice. One touch buttons and and that particular function of the work. The brightness is great on the buttons. You can also change the colors. The fit was great. Durability of the materials is good. Very easy to operate. Just file the instructions nothing's too confusing. It's easier to use instruction. Quality was very good. Like I said just follow the directions as they say

Amazing product! Easy install and looks great!

The Verdict: If you are running multiple lighting zones and onboard accessories on your Jeep, the VOSWITCH JL800 is the most professional way to manage them. It offers factory-grade aesthetics combined with high-end programming features that make controlling a complex rig incredibly intuitive. My Experience: I installed the JL800 in my 2022 Sarge Green Jeep Wrangler JL 4xe Sahara. I have been running this system since June 19, 2023, and it has been flawless with zero issues over the last three years. With a build as aggressive as mine, standard rocker switches just don’t cut it. The JL800 consolidates my entire array into one clean, factory-integrated A-pillar panel. Why it’s a game-changer for my build: Advanced Programming: The system is fully programmable. I have set up modes for each button, including Strobe and Flash patterns for trail safety on my lighting, and standard ON/OFF for my comms and compressor. The grouping feature is excellent for triggering entire light arrays with a single press. Customizable RGB Backlighting: The keypad backlighting is fully adjustable. I have it color-matched to my Jeep’s interior, and the dimming function is perfect for night trail rides. Reliability: Even with the tighter engine bay architecture of the 4xe, the JL800’s consolidated wiring harness reduced clutter and has provided rock-solid performance since the day I installed it. (Pro-Tip) for 4xe Owners: When routing the control wire through the firewall, use the grommet behind the battery/fuse box area. A little wire lubricant or dish soap helps the harness slide through the tight space much easier. My Switch Configuration Switch Accessory 1) Mean Grille Light Bar 2) 4 Pod Lights 3) 6-Pod Roof 4) Rock Lights 5) Ham Radio 6) CB Radio 7) Air Compressor 8) Reserved For Future Upgrade (Thinking Side and Rear Facing Lights for 360 Degree Surround Lighting for the Trail) (Note: The JL800 supports six modes per button: ON/OFF, Momentary, Flash, Quick Flash, Flash & Strobe Combo, and Strobe.) P.S. I purchased this with my own money, and I have used the Voswitch JL800 for over 3 years now with no issues. Note you do need to know how to wire things properly if you do not know how to wire electronics in the car then you should have a professional do it. Especially with the new computer-controlled systems in Jeeps. The first picture is the Voswitch JL800 installed in the passenger compartment of the Jeep. Looks like its OEM part. The second picture is of all my Jeeps. Left to right: 2022 Jeep JL 4xe Sahara (mine), 2012 Jeep JK Rubicon Modern Warfare Edition (mine), 2015 Jeep JK Unlimited Sport (Wife's), 2015 Jeep JK Rubicon (Son's). We love Jeep Wranglers what can we say:)

Easy installation. Blends in with the grab handle. If it's not powered on it don't even notice it being there. Works perfectly

I ordered the JL800, with the 8 switch banks. The installation was straightforward and easy. Everything fit as expected. I had some trouble though, getting it to work with the accessories. I could only get it to work as a hardwired unit, but then I kept forgetting to shut it off every time I parked. People kept saying "Someone left their lights on," and I'd have to keep going out and turning them off. I kept following the instructions to wire it to the accessory fuse (#52 Cigar lighter), but no matter what, I couldn't get it to work with the accessories. After much frustration, I went to the VOSwitch website, and wrote an email to their help desk. I got a response almost immediately. VOSwitch helped me troubleshoot it. It turns out it was absolutely my own fault, as when I'd crimped my MicroFuse Plug onto the power wire, I somehow didn't grab enough copper wire in my crimp. I have a box full of these microfuse plugs, so I just cut off my first crimp and crimped on a new one. Now it works perfectly. I can leave the vehicle with confidence now that I didn't forget to turn off all my additional driving and fog lights. I really like these switches. I like how they clean they look, like they were built into the Gladiator from the factory. Now that it's installed, I can wire up any extra lights, horns, cameras, etc, without ever having to deal with wiring into the cabin. All the wiring is done under the hood. Installing new lights is as easy as running the wires from the lights to the relay box under the hood. It's one of the coolest things I've put on this Gladiator.

I installed on my 22 JLU Rubicon. Only way I figured it out was to watch a whole bunch of Youtube videos on JL300 or similar models. Install took longer due to the wiring. So if your are a wiring guru then you don't need much to install. So far everything works great. I used 7 of the 8 switches.

This is a great switch and an easy install, with a few tools. If you are kind of handy with tools, you shouldn't have a problem installing this yourself. My son and I did it in about 45 minutes. I watched a video which made the install even easier. Love the switch, highly recommend. The switch works just as advertised. You can change the color of the backlight, which is a cool feature if you're going for a specific color scheme. This switch looks like it comes from the factory. It is a quality built product. I have had a couple of switches before and this is by far the best one I have owned. It is still useful as a grab handle if needed. Although the switch is on the higher end as far as price, for me it is worth the price.

Previously had a switch panel that worked by remote. It worked, but at times I had hold the remote near the windshield near the switch to get it to work. Had heard about the Voswitch JL800 Grab Handle Switch Panel and thought " this would be perfect" and it was. It looks great and works great. Very easy to install in my 2021 JLUR. Instructions were very easy to understand and follow. Took about an hour. Very pleased with how it looks and work.

This switch is easy to install and works well. I have used 3 of the 8 spots and am impressed. The white, blue, red and green options are nice as well as the strobe. You can use the lights individually or selected lights as a group. I used a separate switch to avoid using my Jeep battery Recommended

If you’re looking to add more switches to your vehicle than this is definitely the way to go. I love how it keeps a stock look like the vehicle came with it, and love all the functions it has including the colour change 🔥🔥

So far so good I love this grab handle switch it works amazing very easy to install I ran longer wires to install it on my driver side due to my snorkel being on my passenger side and it still works great a little hotter on that side which worried me but it hasn't done anything to the box yet

Fit perfect.Excellent customer service.Looks like a factory switch. Easy installation