🛹 Own the streets with legendary precision and style!
The Powell-Peralta Tail Bone White 8" skateboard deck combines over 35 years of expert craftsmanship with premium American-made materials. Designed for all skill levels, it features a durable ultra high molecular weight polyethylene deck and 99A polyurethane wheels, delivering unmatched performance and style for the modern skater.
| Brand | Powell Peralta |
| Color | White |
| Age Range (Description) | Adult |
| Skill Level | All |
| Deck Width | 8 Inches |
| Material | Ultra High Molecular Weight Polyethylene |
| Wheel Size | 53 Millimeters |
| Wheel Material | Polyurethane |
| Durometer Hardness | 99A |
| Global Trade Identification Number | 00845584098919 |
| Skateboard Type | Shortboard |
| Size | 8" |
| UPC | 845584098919 |
| Item Package Dimensions L x W x H | 8.78 x 2.91 x 0.47 inches |
| Package Weight | 0.07 Kilograms |
| Item Dimensions LxWxH | 0.79 x 9.45 x 1.97 inches |
| Brand Name | Powell Peralta |
| Model Name | Tail Bone |
| Suggested Users | unisex-adult |
| Manufacturer | Skate One Corp. |
| Part Number | EST8W |
| Model Year | 2016 |
| Included Components | Skateboard Tail Guard |
R**A
OG Skateboarding
Powell Tail-Bone Slider not only protects the tail of your deck but you can slide to a slow stop which I enjoy at full speed. Great product.
W**N
No mounting screws included.
No screws included as per instructions. Bag was torn.
G**L
Very helpful!
Used for doing spins rather then wearing down the board. Very helpful!
A**O
Fits Santa Cruz Bart Slasher
Fits perfectly on a Santa Cruze Bart Slasher. No trimming required.The instructions said to use a 7/32" drill bit but that's too big, I used a 5/32" and it worked perfectly.
W**N
Make sure the pilot hole isn't too tight
Used a drill bit smaller than the screws, and "wobble expanded" so they wouldn't bite too hard on the board, and cause a space when driving into the plate. The third one, that's what happened. Tried backing out the screw (power tool), stripped the head. There was enough left for me to use a small straight edge bit, along with a an impact driver, to pull it out. Drilled out the pilot hole again, used the straight edge setup, when the screw hit the plate, it sucked it down to the board hard. Super happy with the slide of the nylon. Will buy again
C**Y
This is for a 10 inch board but can be trimmed to 8 in board
Note this is made for a 10 inch board, However I trimmed to fit my 8.25 inch board. place on board, trace along board and cut 1/4 inboard from trace. Also you will have to re-drill your holes and Countersink. Clamp to cut with Jig saw and sand with high speed sander. Dremel's work but take longer and there is lots of white plastic residue when cutting. From the picture it works be more patient than me.......
H**K
Good quality, smaller than 1980 tailbone
Nice quality plastic. It’s not as wide as the 1980s tailbones but it’ll do the job well.
J**B
Works great on my 10” Alva reissue
Wide enough for this board. Even had to trim a bit off the sides for a perfect fit. Slides really well. Odd smell to it but seemed to go away after a while. Better than a homemade plexiglas tail guard!
Trustpilot
1 month ago
3 weeks ago
