26 inch Ebike Conversion kit 48V500W Rear Front Motor Wheel with 48V13Ah Battery Fit for 6S 7S 8S 9S 10S Cassette Screwed Brushless Motor Kit

I bought the Yose kit and have installed it, installation was not difficult. Watched a lot of youtube video's and read internet articles. I am very impressed with the power of my bike, the battery life and the ease of operation. Since I have not had it that long, I will have to wait to make a final review but so far so good. The one thing I will share is once I got the bike together the pedal assist was not working. I discussed it via email with Yose support and couldn't figure it out initially. I read somewhere, that someone pedaled backward and found that the motor came on. So, I pedal backward and found that everything was installed correctly except that the magnetic sensor was on backward. I reversed it and now the bike operates perfectly. Everything I look at showed the shinny part of the magnet facing out, but in reality the right way was for the shinny part of the magnet to face toward the sensor. The 5 settings of the pedal assist seems to work around 5/6 MPH, 9/10 MPH, 14/15 MPH, 19/20 MPH and 24/25 MPH respectively. Hope this helps someone trying to put together their Yose kit. I am very pleased so far.

The media could not be loaded. 500 watt Yose Power rear tire hub drive.I installed this kit on on an older Diamondback and could not be happier with the outcome.. I have put about 30 miles on it since I installed it and really enjoy having the electric assist.The kit was not that difficult to install. But I did need to get a bracket to install the battery correctly so it fit properly with my water bottle screws. Not a big issue.I bought the cassette version and had no issues transferring my cassette over.I have used the bike on roads, and trails..

the bike needs a lot of specific things for this kit to work. If you do get it on it works great is quite reliable.

I got this kit thinking i wold convert my wife's old Rock Hopper to a modern E bike. Be warned, this kit is mean for conversion of newer bike frames. The rear stays had to be expanded to accommodate the rear hub motor. This is not something the average person can do, however, I was fortunate to have worked in a bike shop. Next the rack for mountain the battery to the down tube did not fit and had to be modified so the battery could set in the rack properly. Once i had the whole thing together and all electrical connections made i turned on the battery and display and nothing. Ultimately i took it to a specialty bike shop where the owner and i checked everything out and found the battery was fine but the controller was sending no power to either the throttle or display. Then i had to spend several more hours taking it all apart and shipping it back. You would be better off buying an E bike than trying to make a conversion with this kit.

I purchased this kit about half a year ago and have been happy with it! The main thing you need to know before buying a kit is what style of cassette you have on your bike wheel. You basically have to take the wheel off your bike to find out which one you have. I used the cassette style on mine which is a slotted gear with a little nut to hold it onto the wheel. The other style is a thread on type make sure you order the right kit! I get approx. 10 miles on a charge which isn't anything to brag about, also power is very minimum but if you want a real ebike you can spend your $1000+ bucks and get one! I have about $600 into mine and it has many features like a higher dollar ebike, like adjustable pedal assist and a speedometer! Happy ebiking!

I found it on line N it was great. For the guy who cant figure out the pedal asst it will tell you how. The short of it is hold down the down button till the bike moves then pedalit will take off adjust the speedn start pedaling. Very nice kit but you better be ready to modify certain things For the guy who cant figure out the pedal asst it will tell you how. The short of it is hold down the down button till the bike moves then pedalit will take off adjust the speedn start pedaling. Very nice kit but you better be ready to modify certain things to your bike.

Highly impressed! I'm almost finished with build

I am adding this kit to a Catrike Trail. I am still waiting on a PAS extension cable to complete my install. The downside to any ebike is it adds a lot of weight.With a 2 inch Columbia tire on the rim with what could be called a gravel / road tread it runs very smooth and without noise whether under power or coasting. This peddles so much easier than my other ebike ( EB7 ).