VIVO STAND-V002F Dual LED LCD Monitor Free-Standing Desk Stand for 2 Screens up to 27 Inch Heavy-Duty Fully Adjustable Arms with Max VESA 100x100mm

I have a small desk and this does not take up much space. Very sturdy and easy to assemble

Assembly was not too difficult. there are a few different pieces but most if not all of the tools were provided. There are small hex cap nuts that lock the monitor brackets in place that I tightened using a nut driver but other than that everything is accessible. Honestly, there was no need to tighten these down I am just used to working in offices where people try swapping out monitors when you are on vacation and if it is slightly difficult to remove then they will leave it alone but that is not part of this review. I installed this mount using 23 inch monitors and it worked very well until I found a good deal on some high quality 27 inch monitors. I was worried about the size and weight but neither was an issue. In fact I neglected writing this review for 6 years before I was looking to replace it with a fixed base stand. Frankly when I received the replacement stand I felt I would rather use the stand I have been using for the past 6 years as it is slightly better. I will research a way to make the mount a permanent fixture to the table since that is what I am going for now but there is no rush as the current stand is working fine. The reason for making the mount permanent needs to be pointed out that with the monitors extended forward past the base the base wants to tip forward. But this is only if you move it to an extreme position that it is a risk of tipping. But like I said I have been happily, blissfully ignorant of any issues with this stand for the past 6 years. If I can't figure a good way to make this a permanent mount then I guess I will have to change it out. Still thinking of using most of the parts that are transferable. I regret not finding the same brand when I bought the fixed mount.

Pros: Easy to assemble. Great range of motion. Cable management built-in to keep things neat in the back. Everything is metal, so very sturdy. With two monitors on a single stand, this frees up desk space underneath for other things.Cons: need tools in order to make adjustments. Fortunately, it comes with the necessary tools. Wish it had notches in some of the adjustments like height and tilt. For example, the height adjustment depends on friction to maintain its position. Have to tighten the bolt really tight so the monitors don't slide down. Same with tilt. Have to make it really tight so the monitors don't tilt down. Problem is, not sure how tight it the right amount of tight. If you over-tighten the bolt, that makes it harder to loosen in the future if you need to re-adjust it.I attached two 24" monitors and with the monitors side-by-side, the arms stick out around 7-8 inches behind. Since my desk is up against a wall, this prevents me from pushing the monitors against the wall. Since my desk isn't that deep to begin with, the monitors are closer to my face than I would prefer. Two 27" monitors would probably be a better choice so the arms are spread out wider.Suggestion for buyers: assemble the whole thing, including the monitors, flat on the floor. This way, the arms will be balanced when placed upright.Despite negatives, the stand works for me and I would buy it again. I would probably pair it with a couple of 27" monitors instead.

This stand works very well. I wasn't sure if it could hold two full size (24") monitors without being top-heavy, but it is definitely sturdy and fits my needs.

Great stand. Very affordable.

Works great! This really opened up the room on my desk. It was easy to put together by myself and seems stable.

So far, so great! Originally purchased a package deal with two monitors and a stand (from another company/not Amazon), but the stand was a nightmare to set up and the base took up too much room on the desk (no arm room left for keyboard/mouse comfortably), so I had to find an alternative. This fit the bill as I’d be able to angle the base of the stand in the corner of the desk. Along with this stand, I purchased two 24” LG monitors - both of which arrived today. Super easy and quick to set up, and it holds the monitors very well. It’s easy to maneuver to position the monitors exactly to my liking. Will update review if anything comes up, but so far I’d definitely recommend this stand!

Cons: This monitor stand was a pain to assemble. They gave me a 3mm, 5mm, and 6 mm key wrench; however, one of the key screws required a 4mm key screwdriver/wrench. Luckily, I had one spare, but I do not think that other people will be so lucky. The monitors were hard to put on as well as the stand will fall if the other monitor is not put on simultaneously which can be hard to do alone. The range of motion is also restricted as some orientations will cause the stand to fall; however, this is not too much of a bother because people should expect that to happen. Also, adjusting the stand isn't as easy as it looks as screws must be loosened and tightened for small things like tilt.Pros: The stand looks really good when assembled. I also really like the cable management options that the stand provides; it makes my desk look extremely clean.Conclusion: This stand looks really nice and minimal; however, the setup and assembly are a very big hassle. The stand is also made of metal and feels really sturdy to the touch. I actually debated putting this monitor stand as 4 stars because the setup process is something you do once or twice and then never have to deal with again, but the setup was such an inconvenience that I settled on 3 stars.