Real Avid Bore Boss Clean Storing, Pull Through, Bore Cleaning System

I have been curious about these for quite a while. But I have been pretty happy with regular ol’ bore snakes...However, it’s always a struggle getting the “rope” started down a rifle barrel when it’s on a vice block. I was hoping it would be easier with this tool, since the cable is more ridged.And it has been, it’s much easier to get this started down the barrel. However, there was a sharp “barb” on the round weight at the end of the cable I had to dremel off...as I was worried it would scratch my barrel if I didn’t remove it.Other than that, the quality seems fine. The brush does seems to bend a bit depending on which way you coil the cable, since this causes tension that pulls on the end of the brush....but it’s nothing I’m concerned about and is barely noticeable. For now, I’m happy and will keep using this tool because of its convenience and simplicity, but if you already have a bore-snake, I wouldn’t worry about “upgrading”*******************************I rely heavily on reviews when I make purchases so I put some time into reviewing everything I buy on Amazon for personal or business use so I can help other people considering that item. If you found my review helpful, please consider hitting the "helpful" button below when it asks if the review is helpful!

So I saw the picture, and thought what a good idea. It wraps up the bore snake in a handy package. Looks great doesn't it. I think I'll take the other bore snake out of my cart and buy this one instead. What could go wrong....This thing is mainly a plastic (feeling) lightweight wire with a ball on one end and the short, SHORT bore snake-ish (emphasis on ISH) thing on the other end with no brush part at all. It was only cloth, unless of course the "brush" part was supposed to be what was actually the badly burnt together part of the cloth. This was supposed to be for 22 rimfire. I pulled it through ONCE and regretted it. I honestly thought it was going to break off in the barrel. I promptly wrapped it back up and put it in file 13. The only reason I did not give it a single star is because it is a really good concept. If they had only created one with more bore snake and less flimsy lightweight plastic-wire-thingy with a metal connector, it would be good. Also, DON'T put a piece of metal as a connector between the 2 that is the same size as the bore!!!!!! Also, but something other than cloth that is burnt on one end. I mean...really?!!? Soooo, would I buy one again? Yeah...no.

My .308 AR-10 and my .300 BLK AR-15 both have a standard A2 bird cage. The ball at the end of the stiff section of cord gets caught in the bird cage and it is extremely difficult to get it to pass through. In 10 or so attempts I only got it through twice. This was very frustrating. This is due to the permanent curvature of the stiff section, it does not drop straight down the bore. I even tried to straighten it but have extremely limited success. I also have a 9mm carbine that I thought I could use the 9mm kit to clean. Nope. The stiff section of cord on the 9mm is sized specifically for pistols, not long enough for the 16" barrel. I'll keep these but likely won't be buying any more of this brand.

What a well thought out product! The bore snake has been popular for some time, now, but this turns it into a complete kit. The snake stays in its container until needed. The container serves to keep it clean as well as a hand-saving device with which to use the snake. This is going on the Christmas list for all the guys and in all the calibers. I just love how compact it is - so much easier than stowing the snake in the thin plastic box they are sold in, generally. I'll upgrade all the current snakes and then stow the old ones in emergency bags. Very pleased, indeed.

I wanted to like this. I really did. But after taking it out and playing with it, having used it to clean a 12g it just doesn't stack up to other products I have at home. It'll probably go on the shelf.The case:It's a novel idea. Great in theory, not great in execution. The brush bristles got flattened on one side after the 3rd time I put it back in the case and the wire is already bent. the bristles on the brush also are already bent pretty bad. It's also HUGE! To have more than one or two of these in the gear back takes up a significant amount of space! I did like the "handle" aspect but I could only fit two fingers in and kept losing my grip. Like the rubber flip over sides though.The snake:Way shorter than I'm used to. Snake measures less than half of a boresnake that I'm used to. Thick enough to fill up the barrel but the material was hot melted at the tip causing it to be a bit rough.Overall it did the job but I like the extra length of a regular boresnake that I can just wrap up and tuck in a range bag pouch and not lose a ton of space. Nice idea with the case, just needs to be better executed.

So far this thing is great. Sometimes when I shoot my AR i'm just running one magazine through it and i'm not gunking it up enough to warrant the time for a complete strip down and getting every surface polished again. When I just run one magazine through my AR, all I do to clean it is spray one quick spray of cleaner down the barrel and let it drip out, then run this through the barrel three times, then spray one good spray of oil down the barrel and let that drip out. Once it stops dripping I put it back in the safe. Cleaned up the AR in minutes, good enough for when i've only fired a few rounds.

I am using this product for my Ruger 10/22 and Stoeger Shotgun. So far I am very satisfied, it cleans well and is very easy to use. After hundreds of rounds, all it takes is to pass this through the barrel 2-3 times. Based on my experience, all is needed for any gun cleaning - this product (must be caliber specific), brass brush, Q-tips, paper towel and Ballistol. With the above said, I highly recommend this product!

I now have the bore boss for .22, 7.62/.30/.308 and 12 gauge and while the cost is adding up, I'm a big fan. They work much better than my universal cleaning kit that retails for more than the three bore bosses combined.When I say that they work better, I mean that they do a better job cleaning (patches go over the brass brush) and it's faster than traditional cleaning rods. What's more important is that in two cases, I cannot remove the bolts without major disassembly and both the .22 and 7.62 brushes allow me to clean the chamber and bore without taking anything apart. A quick clean every time really simplifies and spaces out major cleaning.In fact, I could not clean the .22 with a cleaning rod without a "full" disassembly (stock, trigger group, bolt, guide rods & springs had to come off) as the brush was just too long. The bore boss in the .22 version ingeniously has the brush built into the mop and it all fits in nicely through the ejection port without taking anything apart! On bigger versions of the bore boss the brush and mop are separate.The 12ga bore boss works just as well although, it's not as needed when the entire barrel easily comes off. And of course they all pack into the handle and are easy to throw into your pocket or a bag of any size.After a few uses I wash bore bosses with warm soapy water then squeeze the water out of them and let dry for a few hours. The dirt and oil comes right out and they are asking good as new again. I'm very happy that a product actually lives up to its hype for once.

Habe diese Laufreinigungsschnur mal zum testen bestellt, da ich bisher nur Hoppes Bore Snake im Einsatz hatte.Im Vergleich dazu fällt zwar die Länge der Wischschnur deutlich kürzer aus, ist aber etwas dicker im Diameter, wodurch ein besseres Reinigungsergebnis durch engeres Anliegen an Zug / Feld Profil erfolgt.Der vordere Bereich zum Einhängen in der Hülle macht die Anwendung zu einer sehr einfachen und sauberen Sache. Vorteil: Ist man fertig rollt man die Laufreinigungsschnur wieder in die Hülle, klappt den Gummimantel vor und packt sie in die Tasche.. und schon bleibt der Range Bag sauber =)Kann sie jedem weiter empfehlen.

Does what it is supposed to but be aware the area where the nylon thread attaches to the bore cleaner is quite bulky, too much so to fit in the barrel. I had to flatten it out a bit with a soldering iron and heat/melt the end of the fabric.

Buon prodotto per pulizia ar15 che con la bacchetta è più difficoltosaScomodo lo scovolo finale fisso

Love this little gadget. Such a great design. Easy to unpack and repack. Nice quality materials.