BN-LINK Temporizador programable Digital de alta resistencia de 7 días, 115 V, 60 Hz, Salida Doble para ventilador ligero, certificado UL (paquete de 2)

I bought a set of these for our lamps as the old style was difficult to set and had to be reset every time the power went out or for the time change. These have gone through both power outages and a time change and adjusted perfectly. Liked so much I bought 2 more sets. The only difficulty I encountered was setting my new ones as I was already into daylight savings time. Push the DST button then set time. It's also a little difficult to see manual vs auto / on vs off.

I charge two battery systems. Don't have solar panels yet. 20A & 40A chargers for RV and Music power respectively. They seemed to cycle too much so I enable the house system three cycles (12 hours) and music system two cycles (10 hours) so they remain at or above 13.1 volts (40% charge).Thos allows 7pm-2am quiet for music recording.

I was thinking I need something to restart Internet every so often as I’m tired of my smart home, turning into a dummy when the Internet goes down and then I can’t operate some lights and my air conditioning and it just is a hassle to get up and put on your screws and go out into the garage because mine is full lol and go unplug this thing and then put plug it back in. Then I’m good for however, long. I fear there has to be a way to automate this so it can restart itself every so often and whatever it needs to do when it restarts - so many choices on the web or very complicated to me as far as router restart and I figured there had to be something like this like a time that you use for your Christmas lights or something it maybe it goes on and off a few times while you’re sleeping or while you’re away at work and takes out the garbage or whatever it has to do when it starts. this looked perfect. It looks like it has a lot of ways you can program it a lot of flexibility some of it is a little bit tedious and a little bit complicated to screw up with the wrong schedule, but that doesn’t mean the device has any problems. Just means I need to pay more attention when I’m programming it. That’s why it’s sitting in the box after I played with it for a little while because I couldn’t get it all done and that’s my problem at this device not the device problem. I think if I can get set up this is perfect.

Cheap, well built, reliable, and easy to setup and use. Works flawlessly only draw back is there is no backlighting on the screen so to read it, setup, and use you either need to be in a well lite spot or a flashlight at hand. That being the only draw back turning off and on items is flawess.

Two Year Update:After a little over two years, I still love this timer. It's worked flawlessly and has been a night-and-day improvement over the analog timers I used to use. I use it for setting a radiator-style space heater to run in the evening and early morning. Unlike the analog timers I formerly used, I never have to correct the time and I never have to worry about bumping it and changing the programming inadvertently.The main potential problem is that how to program it is not obvious. I keep the original instructions handy for when I want to change the schedule. It's not a big problem. After you've learned to program it initially, changing the programming is pretty easy, but it helps to have the instructions as a reminder. Overall this is a great timer that I recommend highly.Original Review From Two Years Ago:I’ve only had the timer for a day, so I can’t attest to its reliability yet, but I am impressed with how much of an improvement it is over the mechanical timers I’ve used for years. Set up is fairly easy, however many people may be confused by the setup and programming instructions, so here is how I did it.Setup=====Follow the instructions to initially set the day and time. Be sure to set it to standard time even if you’re currently on daylight savings time. If you’re currently on daylight savings time, then after you set the time, press the HOUR and MIN buttons simultaneously. The time will automatically advance an hour for daylight savings time. In the fall, to return to standard time, press HOUR and MIN again to set the timer to standard time.Programming==========This is the part that will confuse a lot of people. Here’s how I did it.There are 8 program settings, each of them with a separate ON-OFF setting. Each time you press the PROG button, it will advance. The first time you press PROG, it displays 1ON (1 + ON in smaller, raised letters). The second time you press PROG, it displays 1OFF, the third time it displays 2ON, the fourth time 2OFF, etc.The programming steps are:1. If 1ON isn’t displaying, press PROG until you get to 1ON. (1 + ON in smaller, raised letters)2. Press WEEK. You’ll see all seven days display. If you want the timer to turn on all seven days, then just go to step #3, otherwise press WEEK again until the days you want are displayed.3. Press HOUR until the hour you want the timer to turn on is displayed4. Press MIN until the minute you want the timer to turn on is displayed5. Press PROG once. It will now advance to 1OFF.6. Repeat steps 2 - 4 for the day, hour, and minute you want the timer to turn off.7. If you want to set another day and time for the timer to turn on and off, press PROG once and then repeat steps 2-6. Continue this process until you’ve set up to eight day-time combinations for the timer to turn on and off.8. To activate the programs you’ve just set, press ON/AUTO/OFF twice. It should now display AUTO. In the future, if you want to override the programming and force the timer to be either on or off all the time, press the ON/AUTO/OFF button until either ON or OFF displays.A red light on the timer will turn on whenever the timer is on. The light goes off when the timer turns off automatically or when you turn it off manually by pressing ON/AUTO/OFF.CAUTION about using this with a space heater====================================I’ve used 1500 watt space heaters on timers for decades, but YOU HAVE TO BE CAREFUL!Make sure the timer is rated for more than the wattage of the heater. This timer is rated for more than 1500 watts, so theoretically it is safe, but it nonetheless can still start a fire if you don’t take precautions (and even if you do take precautions).1. Never plug the timer into an extension strip or surge protector if you’re using for a heater.2. Never plug the timer into an extension cord that isn’t rated at least for the heater.3. Try to avoid running the heater at full 1500 watts. It’s easier for me to follow this rule because I don’t experience extreme cold weather where I live. On the rare occasions when I do run the heater a the full 1500 watts, I don’t leave it unattended.4. Periodically unplug the heater and examine the plug. Over time, the heater’s plug may deteriorate. I’ve thrown out several heaters when they’ve reached this point. Last week I threw out both my 30 year old oil-filled radiator heater and my last timer because the heater’s plug showed signs of deterioration and had visibly damaged the socket in the the timer. The timer still worked, but would have been unsafe to use. I’ve seen two forms of plug deterioration: the plug’s smooth plastic surface becoming rough around the metal prongs, and the metal prongs themselves showing signs of beginning to disintegrate.So far I'm really impressed with this timer. If something happens to lower my star rating, I'll update this review.

So far, this is the best timer for house lighting that I have ever owned. Easy set up. Since it is electronic, no irritating noises as it does its job. Thank you!

I bought two of these for my dehumidifiers. One of them worked perfectly, but the second one has issues.You can program the second one unit following the instructions. However, as soon as you plug it to the outlet, the minutes of the time start advancing -like a second- and continue loop until you press a button. Then time became wrong. If you set the time again after plugging in, it seems to work properly for a short time I tested.

This plug is great at doing its job. It has around 8 programmable times for the plugs, and although the buttons may be a bit confusing to learn at first, to set the times. Once you get it, it becomes a breeze. I've had mine for a couple of years now, and it still performs like the day I got it. The only reason I rate it 4/5 stars is because I feel as though it wouldn't have been too much more to make the two plugs separately programmable.